Insuree ars-essor.....He say yeah :D
Discussion
Some one at NU must have read my rant yesterday
The NU chap turned up,wasnt remotely interested(or knowledgeable
about the # or type of mods as it happens-(should I feel insulted? )Anyway after a few mins of
hum & err,He OK'ed all the work-phew quote me happy & all that
Relief all round.'liner back on road in a couple of weeks....come on garage!
Still would'nt have been ready for VMAX tho
>>> Edited by tuttle on Wednesday 22 September 21:04
The NU chap turned up,wasnt remotely interested(or knowledgeableabout the # or type of mods as it happens-(should I feel insulted? )Anyway after a few mins ofhum & err,He OK'ed all the work-phew quote me happy & all that Relief all round.'liner back on road in a couple of weeks....come on garage!
Still would'nt have been ready for VMAX tho
>>> Edited by tuttle on Wednesday 22 September 21:04
Thankyou,Very relieved.The state of play is more or less as follows.The garage claim to be starting work on it next Tues & will take around a fortnight.I'm going to add at least a week to that.
I've now got just about all the necessary parts(except one headlight),this is my usual garage & I've always sourced my own spares for them-they just do the fitting/painting.So barring any unforseen surprises 3wks.
I've got some fairly decent 17" spares with Falken rubber that will fit OK untill the Volks arrive
.I'm a bit worried by one of the Tein units tho,seems to be leaking but I can't tell where fromAny one,any advice?I think they're going to have 'fun' fitting the new bumper over that FMIC too,It made sense to get a R33 GTR copy-because the I/C mouth is much better suited for air flow over the FMIC.-I'll look like a poser tho
Cant wait to get it back on the road,shame most of the summer's over.Plenty of work to be getting on with too,got some bigger injectors to fit,the new turbo needs sorting & a good mapping session will be in order.Probably with Rising Sun,-Richard Bell maps 'as is'on the road-at night
,it can be quite scary.He's had good results with this car so far tho,& he does like GTSTs. 
----etc-etc-etc
>> Edited by tuttle on Friday 24th September 22:36
I've now got just about all the necessary parts(except one headlight),this is my usual garage & I've always sourced my own spares for them-they just do the fitting/painting.So barring any unforseen surprises 3wks.
I've got some fairly decent 17" spares with Falken rubber that will fit OK untill the Volks arrive
.I'm a bit worried by one of the Tein units tho,seems to be leaking but I can't tell where fromAny one,any advice?I think they're going to have 'fun' fitting the new bumper over that FMIC too,It made sense to get a R33 GTR copy-because the I/C mouth is much better suited for air flow over the FMIC.-I'll look like a poser tho Cant wait to get it back on the road,shame most of the summer's over.Plenty of work to be getting on with too,got some bigger injectors to fit,the new turbo needs sorting & a good mapping session will be in order.Probably with Rising Sun,-Richard Bell maps 'as is'on the road-at night
,it can be quite scary.He's had good results with this car so far tho,& he does like GTSTs. ----etc-etc-etc >> Edited by tuttle on Friday 24th September 22:36
-anyone want a passenger?
Gaz? Gassing Station | Japanese Chat | Top of Page | What's New | My Stuff