Discussion
Brummmie said:
A reworked T5 is not going to defy physics, the gears and shafts are still very small compared to a TKO600, and there is no way around this, each component/tooth is still under lots more load, due to surface area even if it is made of unobtainium.
A Tremec 6 speed will compromise your exhaust size/clearance, personally if i were you its a TKO600 with a 3.08 diff..
Why dont you have a drive of mine and get a feel for the box/ratios?
will be at unit all day tomorrow [Friday] if you're coming to work in it.A Tremec 6 speed will compromise your exhaust size/clearance, personally if i were you its a TKO600 with a 3.08 diff..
Why dont you have a drive of mine and get a feel for the box/ratios?
Edited by Brummmie on Thursday 23 October 11:27
Brummmie said:
A reworked T5 is not going to defy physics, the gears and shafts are still very small compared to a TKO600, and there is no way around this, each component/tooth is still under lots more load, due to surface area even if it is made of unobtainium.
A Tremec 6 speed will compromise your exhaust size/clearance, personally if i were you its a TKO600 with a 3.08 diff..
Why dont you have a drive of mine and get a feel for the box/ratios?
Is there an adapter plate available and can you help me with the correct 308 crown wheel and pinion cheersA Tremec 6 speed will compromise your exhaust size/clearance, personally if i were you its a TKO600 with a 3.08 diff..
Why dont you have a drive of mine and get a feel for the box/ratios?
Edited by Brummmie on Thursday 23 October 11:27
SILICONEKID345HP said:
Is there an adapter plate available and can you help me with the correct 308 crown wheel and pinion cheers
I have no idea on the plate or bell housing as i have an LS so did not research Rover option, sorry..The Crown wheel i got from John Reid at Grantura Engineering, however you can get them from Australia Ebay for cheap money but they are a slightly smaller CW although the same gearing, and therefore not as strong, i have broke one of these!
Brummmie said:
I have no idea on the plate or bell housing as i have an LS so did not research Rover option, sorry..
The Crown wheel i got from John Reid at Grantura Engineering, however you can get them from Australia Ebay for cheap money but they are a slightly smaller CW although the same gearing, and therefore not as strong, i have broke one of these!
Is that this one which requires some type of shim 0575 7.5" 3.08The Crown wheel i got from John Reid at Grantura Engineering, however you can get them from Australia Ebay for cheap money but they are a slightly smaller CW although the same gearing, and therefore not as strong, i have broke one of these!
http://www.ebay.co.uk/itm/HOLDEN-BORGWARNER-3-08-D...
Gassing Station | Chimaera | Top of Page | What's New | My Stuff