Converting to Megasquirt

[AceOfHearts]

All mapped today with Shaun from MS2 tuning so it is now running and driving better than ever! Only issue was that a couple of my plug leads were wrong and the stepper motor does not work, so will have to try and get a working one to double check it is the motor which is the issue (if anyone has one they could loan me that would be great!). Shaun was right on the ball though and neither issue cost us much time. It was all done and dusted in around 4 hours and he talked me through what was going on each step of the way.

Very happy though and i am just about to go out for another drive

[AceOfHearts]

Car was great the whole time it was back on the road, although is currently laid up as im not in the UK at the moment

[AceOfHearts]

Belle427 said:

Could I ask how much work it is to rip out the old 14cux loom?
Do you have to cut it open much to keep things such as the oil pressure sensor and otter switch etc or are they in a different section?

No cutting required, if you have a new Megasquirt loom from the likes of MS2 Tuning it is pretty much plug and play

[AceOfHearts]

Belle427 said:

Thanks both, is the base map provided good enough to drive the car safely to the mapper?

Mine came blank, so after I had completed installation I had Shaun from MS2 Tuning (Lincs) to come to me and do a road map.

[AceOfHearts]

Belle427 said:

DangerousDerek said:

Belle427 said:

Very generous of you, thanks.
I will let you know what he says if i get no response from bailey.

Dale's mobile number 07967222967.

Thanks that's the number I used.
I don't really chase people if they can't be bothered to reply to both emails and calls.

Pm sent