FITTING A NEW IGNITION MODULE AND COIL ANY TIPS
Discussion
yes it should be a lucas module that I've ordered where does the heat sink paste go/do ?
and ordered a bosch coil all from ml performance parts "neil"
hi lester your more than welcome to call round when i'm doing the job i'll try to let you know nearer the time
I guess your doing the same as me replacing parts that could break down in a 13 yr + car and keeping the old parts as spares
cheers keith
and ordered a bosch coil all from ml performance parts "neil"
hi lester your more than welcome to call round when i'm doing the job i'll try to let you know nearer the time
I guess your doing the same as me replacing parts that could break down in a 13 yr + car and keeping the old parts as spares
cheers keith
hi all
I fitted my new coil and ignition module today , it was a straight forward job but fiddly
here are some photo's to help others in doing this maintenance task
new ign module with paste and coil
existing coil and ign module
[url]|http://thumbsnap.com/Fcbw223w[/url
old ign module removed with the cleaned bracket ready to take the new ign module
new ign module with thermal paste applied
new ign module and coil fitted
I fitted my new coil and ignition module today , it was a straight forward job but fiddly
here are some photo's to help others in doing this maintenance task
new ign module with paste and coil
existing coil and ign module
[url]|http://thumbsnap.com/Fcbw223w[/url
old ign module removed with the cleaned bracket ready to take the new ign module
new ign module with thermal paste applied
new ign module and coil fitted
Gassing Station | Chimaera | Top of Page | What's New | My Stuff