Stainless steel / Carbon dash kits??
Discussion
Where is the best place to get them from?? Ive had a search on here but to no avail.
I really like the look of the Leven stainless dash kits but they don't appear to be selling them any more. Is this correct?
Or does anybody know another place to get a stainless or carbon fibre dash kit from?
Thanks in advance
I really like the look of the Leven stainless dash kits but they don't appear to be selling them any more. Is this correct?
Or does anybody know another place to get a stainless or carbon fibre dash kit from?
Thanks in advance
Mine were all glued on so it was'nt too bad. Regarding the shapes though, with the radio panel i drew around the metal onto the back of the weave, and then cut it out, but this took a lot of time and wasnt perfect. I found the best way was to stick the whole sheet down, and then go around it with a new stanley blade, using the edges of the metal as the guide. This left a perfect edge and did well on all of the circles too!
ETA
If you are having truble concealing the screws, can you not get a countersink and widen the holes up a bit so the screws are flush?
ETA
If you are having truble concealing the screws, can you not get a countersink and widen the holes up a bit so the screws are flush?
Edited by lewis_sharman on Tuesday 10th March 23:18
schmokin1 said:
fiddling with the switch brackets to get the buttons to work smoothly and not foul the dash holes...
Before i took it apart the light buttons used to do this. Luckily this time when putting them back on they did'nt take much time to line up. I have to get a new 'HOT' LED though as the old one had snapped in the dash and had never worked. Thankfully i think ive found the one i need in Maplins so i will give that a go. Gassing Station | Chimaera | Top of Page | What's New | My Stuff