Temp Sender

[Graham_R]

Hi Guys

Just a quick call for help for my '96 4.0 HC Chimp. My Temp guage has started yo-yoing from about 60 to 80 C I'm guessing it's a dirty Contact, unless you know otherwise.

Anyway I know this sounds stupid, but I can't find the sender to check the contacts, could someone point me in the right direction.

Idiot/blindmans guides always appreciated.

Regards

Graham

[Graham_R]

Thanks guys I'll have a look now.

Regards

Gray

[Graham_R]

Ok I've checked and the levels in the swirl pot and the Expansion pot seem fine.

I was sure it was this, as I've resently fitted a new Rad, and a few pipes.

Could it be air trapped near the sender, anyone any more ideas.

OBTW I still don't know where the sender is.

Regards

Gray

[Graham_R]

Thanks Guys

I'm glad at least one person has had similar troubles, all I have to do now is change it, and it looks like a pig of a job to get to. Then a 10 second job to swap for a new one.

Cheers for all the advice.

Gray

[Graham_R]

So where is this 'Spare' sender? I've got a Serp engine but didn't see anything like a disconected sender while searching for the connected one.

Regards

Gray