Race Techs AP-22
Discussion
Any suggestions for the following values:
CdA, left mine at the default 0.90
Roll Resistance, also at default 0.013, but will attempt the manual callibration.
Tilt Factor, set this to 0.010
Roll Factor, 0.011 (default)
Smoothing, 0.004 (default)
Initial testing has provided some reasonable figures, but I've had new tyres, front brake pads (EBC Green) and a clutch fitted recently, so taking it easy at the moment.
Any suggestions welcome.
Regards
Brian
CdA, left mine at the default 0.90
Roll Resistance, also at default 0.013, but will attempt the manual callibration.
Tilt Factor, set this to 0.010
Roll Factor, 0.011 (default)
Smoothing, 0.004 (default)
Initial testing has provided some reasonable figures, but I've had new tyres, front brake pads (EBC Green) and a clutch fitted recently, so taking it easy at the moment.
Any suggestions welcome.
Regards
Brian
This should explain:
www.race-technology.com/WebPage/Products/Products.html
It's apparently 2-3% accurate straight out of the box and better than 1% once set-up correctly. Hence why I originally asked for some specific values for the Chimaera.
www.race-technology.com/WebPage/Products/Products.html
It's apparently 2-3% accurate straight out of the box and better than 1% once set-up correctly. Hence why I originally asked for some specific values for the Chimaera.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff