Replace faulty vacuum advance or complete distributor?
Discussion
Good morning.
Now that I’ve been using the griffith a lot more recently after an 8 year layup.
I’ve noticed a bit of hesitation under light throttle, and I don’t remember having it before.
I’ve looks at loads of past threads and thought out of interest to check the timing, it hasn’t been touched in 15 years.
But before I went to check it, I checked the vacuum advance to see if it would hold pressure and move the the base plate, it did not, probably due old age and not being used.
So question is, just replace the vacuum advance and see it helps or replace the whole distributor?
Cheers,
Carl.
Now that I’ve been using the griffith a lot more recently after an 8 year layup.
I’ve noticed a bit of hesitation under light throttle, and I don’t remember having it before.
I’ve looks at loads of past threads and thought out of interest to check the timing, it hasn’t been touched in 15 years.
But before I went to check it, I checked the vacuum advance to see if it would hold pressure and move the the base plate, it did not, probably due old age and not being used.
So question is, just replace the vacuum advance and see it helps or replace the whole distributor?
Cheers,
Carl.
Gassing Station | Griffith | Top of Page | What's New | My Stuff