Discussion
Bit more progress today.
Refitted the Vin plate & the engine number to the car
22/09/13.1 by russell.grant, on Flickr
Also fitted the dashboard & front sections of the rollcage
22/09/13.3 by russell.grant, on Flickr
22/09/13.5 by russell.grant, on Flickr
Refitted the Vin plate & the engine number to the car
22/09/13.1 by russell.grant, on Flickr
Also fitted the dashboard & front sections of the rollcage
22/09/13.3 by russell.grant, on Flickr
22/09/13.5 by russell.grant, on Flickr
"Refitted the Vin plate & the engine number to the car"
Glad to see your keeping some original, bog standard features on the car
That's to pretty to drive. I think you should knock the kitchen wall out and park it in there so you can look at it whilst eating your cornflakes every morning!
Almost there now.
Glad to see your keeping some original, bog standard features on the car
That's to pretty to drive. I think you should knock the kitchen wall out and park it in there so you can look at it whilst eating your cornflakes every morning!
Almost there now.
Finished the Interior lighting now. (Ignore the filthy windows)
24/09/13.4 by russell.grant, on Flickr
24/09/13.3 by russell.grant, on Flickr
24/09/13.2 by russell.grant, on Flickr
24/09/13.1 by russell.grant, on Flickr
24/09/13.4 by russell.grant, on Flickr
24/09/13.3 by russell.grant, on Flickr
24/09/13.2 by russell.grant, on Flickr
24/09/13.1 by russell.grant, on Flickr
Tonight I made up a bracket to mount the fuel pump inertia cut off switch and the spotlight relay.
25/09/13.1 by russell.grant, on Flickr
also sent off the v5 with the relevant vehicle changes. So when the new document returns it off for an mot
25/09/13.1 by russell.grant, on Flickr
also sent off the v5 with the relevant vehicle changes. So when the new document returns it off for an mot
This weekend I have finished the boot build & fitted a battery cut off switch.
29/09/13.1 by russell.grant, on Flickr
29/09/13.2 by russell.grant, on Flickr
Also Made & fitted the cold air intake for the heater.
29/09/13.4 by russell.grant, on Flickr
29/09/13.4 by russell.grant, on Flickr
A couple of minor things still to do including fitting an electric auxiliary cooling fan & then its a waiting game till the new V5 arrives.
29/09/13.1 by russell.grant, on Flickr
29/09/13.2 by russell.grant, on Flickr
Also Made & fitted the cold air intake for the heater.
29/09/13.4 by russell.grant, on Flickr
29/09/13.4 by russell.grant, on Flickr
A couple of minor things still to do including fitting an electric auxiliary cooling fan & then its a waiting game till the new V5 arrives.
guru_1071 said:
do you not think your heater air intake will suck water in russel???
Thought of that, so there is a lip on the inside on the bottom edge & some tiny drain holes at the lowest point on the intake. Only time well tell if this will work. But if it doesn't I will just unbolt it and fit a redesigned one on instead. Gassing Station | Classic Minis | Top of Page | What's New | My Stuff