Bridging 2 networks
Discussion
Hope someone can help me with a bit of a networking problem.
Situation is, we have 2 networks, one upstairs and one downstairs. The plan is to link to 2 together wirelessly. Upstairs is a Linksys WAG-54g wireless broadband router which serves all the upstairs computers fine. Downstairs is a Buffalo WLA-G54 AirStation with a couple of computers connected to it using RJ45 cables.
Now the challenge is to get the 2 hubs to talk to each other so that the downstairs computers can "see" the upstairs ones and visa versa.
Is this doable with our current equipement? and if so what settings are needed?
cheers![](http://www.pistonheads.com/include/images/smile.gif)
Situation is, we have 2 networks, one upstairs and one downstairs. The plan is to link to 2 together wirelessly. Upstairs is a Linksys WAG-54g wireless broadband router which serves all the upstairs computers fine. Downstairs is a Buffalo WLA-G54 AirStation with a couple of computers connected to it using RJ45 cables.
Now the challenge is to get the 2 hubs to talk to each other so that the downstairs computers can "see" the upstairs ones and visa versa.
Is this doable with our current equipement? and if so what settings are needed?
cheers
![](http://www.pistonheads.com/include/images/smile.gif)
Hmmm, after spending the best part of a day faffing with both hubs I've come to the conclusion it's not doable
It seems the upstairs router doesn't have any way of "knowing" about the downstairs one. Trouble is I don't really know what I'm doing! Cable networks are so much easier to understand but all this MAC address stuff is quite hard to get my head round. If anyone knows of a step-by-step guide I'd appreciate it.
![](http://www.pistonheads.com/include/images/frown.gif)
BliarOut said:I'd worked that out but there's a whole load of settings that can be changed. The downstairs hub has:
MAC address is easy. Usually printed on the bottom of stuff, it's a 12 digit hex number you are looking for.
Next
Routing tables
bridging stuff
SSID
I thought that if I set both hubs to the same channel (frequency) and used the same IP address ranges (192.168.1.x) and subnet masks (255.255.255.0) they would see each other but it doesn't seem to be the case
![](http://www.pistonheads.com/include/images/frown.gif)
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff