Will this Work!? (new pc...)

Author
Discussion

rob_f

Original Poster:

4,127 posts

266 months

Tuesday 14th September 2004
quotequote all
Installing Xp home onto a machine i've just put together. It won't boot from CD, and the machine doesn't have a FDD. Is it possible to put the Hard drive into my pc, load Win XP then pop it back into new pc, then solve the problem later?

Thanks,
Rob.

rob_f

Original Poster:

4,127 posts

266 months

Tuesday 14th September 2004
quotequote all
1)It loads Nvidea boot manager
2)The Cd rom drive spins up
3)Media device failed, Check cable (or something like that)

The cable looks fine, and it's a small form factor pc so i can't test the cable. If it was knackered though i wouldn't expct it to be able to detect the CD at all. :/

Cheers,
Rob.

rob_f

Original Poster:

4,127 posts

266 months

Tuesday 14th September 2004
quotequote all
It seems this boot manager thing loads whether a CD is in the drive or not... Weird....

Rob.

rob_f

Original Poster:

4,127 posts

266 months

Tuesday 14th September 2004
quotequote all
Okay guys, i stuck a screw through the IDE cable. Now, this is going to be interesting trying to replace this. Still, i know what the problem is now!

Thanks all,
Rob.

rob_f

Original Poster:

4,127 posts

266 months

Tuesday 14th September 2004
quotequote all
Ahh, but it's one of those little cases with the cables routed around the inside of the case, so it's a little tricker. Not impossible though. I just pinched the very edge of the cable so you can see bare metal. Infact if i give it a little wiggle it works so i think it may have been just shorting out. In which case i'll just tape it up. Not sure if the wires inside the cable are touching sometimes though.

Thanks for the help though plotloss

Rob.