Carbon monoxide detector - what am I doing wrong?
Discussion
I may appear a bit of a thicko but I bought a new carbon monoxide detector yesterday but it keeps beeping as if the batteries are low and need replacing.
it's a Smartwares FGA-1304 new from Screwfix.
I've tried two different sets of varta batteries and tested them with my battery tester and they're fine.
It keeps beeping and flashing yellow. Anyone had the same issue and resolved it or is it buggered?
it's a Smartwares FGA-1304 new from Screwfix.
I've tried two different sets of varta batteries and tested them with my battery tester and they're fine.
It keeps beeping and flashing yellow. Anyone had the same issue and resolved it or is it buggered?
Have you read the manual?
I know that sounds like the smartarse comment but I'd expect it will state what the beep/flash codes mean.
https://www.manuals.co.uk/smartwares/fga-1304/manu...
Sounds broken.
I know that sounds like the smartarse comment but I'd expect it will state what the beep/flash codes mean.
https://www.manuals.co.uk/smartwares/fga-1304/manu...
Sounds broken.
Normal operation Green LED flashes every 45 seconds
Testing Red LED flashes rapidly 5 beeps
Alarm Red LED flashes 15 times in 4 seconds. Rest 3 seconds, then repeats15 beeps in 4seconds, rest 3seconds, then repeats
Malfunction Yellow LED flashes 2 times every 11seconds2 beeps every 11seconds
Low battery signal Yellow LED flashes every 45 seconds1 beep every 45seconds
End of life Yellow LED flashes 2 times, END is shown on display 2 beeps every 60second
Testing Red LED flashes rapidly 5 beeps
Alarm Red LED flashes 15 times in 4 seconds. Rest 3 seconds, then repeats15 beeps in 4seconds, rest 3seconds, then repeats
Malfunction Yellow LED flashes 2 times every 11seconds2 beeps every 11seconds
Low battery signal Yellow LED flashes every 45 seconds1 beep every 45seconds
End of life Yellow LED flashes 2 times, END is shown on display 2 beeps every 60second
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff