clutch/ black gunge

[bells V8]

does anyone no how to bleed the clutch fluid on the vxr,s.as mine is full of black gunge

[v8nhh]

Black gunge is usually from overheating of the clutch fluid, to bleed the clutch is a pain as the bleed is inside the bell housing and is fiddly to get to, it would be much less agro to take to monkfish etc to sort for you, also watch out for the clutch reservoir caps cracking had mine go.
In the archives somewhere there is a full explanation + pics on how to bleed clutch ,not sure if what LS1 forum etc.. someone else on here will answer shortly I'M SURE!!!

[Doleboy]

Here you go.

http://www.rangeracceleration.com/Clutch_Care.html

Draper do an Oil Suction Gun that looks like it'll do the trick. You can get them from Amazon.

[L2VXR]

I posted a file a long time ago with instructions on bleeding the clutch in this old thread

www.hsv.org.uk/topic.asp?h=27&t=318100&r=4196850&hm=65670#4196850

bad news is i no longer have the pdf file as my harddrive died but may be Well Fans OR Jeff still have a copy

if they do could they post it up again as i could do with it also

Edited by L2VXR on Friday 28th September 23:02

Edited by L2VXR on Friday 28th September 23:04

[crisisjez]

Don`t waste your time.

The clutch fluid volume is so small the new fluid will overheat within a few miles.

All Monaros have this problem.