The Mods to my C7 Continue ...... a Pace
Discussion
largelunchbox said:
Titan said:
I do like that plate mounting,order me one pleaseSaw the number plate holder on a C7 Z06 on the Chevrolet stand at the Festival of speed in 2016. Tracked it down to a German company/dealer called Geiger Cars, just do a google search.
They do all sorts of tuning bits for Corvettes, the plate holder is shown in carbon and is not cheap at, if memory serves me correct, about €500.
If you want to save a bit of money, then they also do the holder in plastic (but it’s not shown on the site) at a fraction of the cost. Then get it carbon dipped if you want the same finish.
They do all sorts of tuning bits for Corvettes, the plate holder is shown in carbon and is not cheap at, if memory serves me correct, about €500.
If you want to save a bit of money, then they also do the holder in plastic (but it’s not shown on the site) at a fraction of the cost. Then get it carbon dipped if you want the same finish.
scs1 said:
Great looking car Sounds Legal. The mounting plate/position is the one of the best I have seen on a C7.
I used a modified C6 mounting plate on my C7. I ground of the edges and cable tied it to the grille. Then I stuck on the plate with pads.
I managed to get away with a small front plate on my C6 Zo6 for a couple of years then got fined £100 ,so I had to go with the full size on the C7.
I have also added some aluminium accents to the interior. The round knobs, the small panel on the left of the wheel and the surrounds of the air vents on the drivers side. Strangely the passenger side comes with the vent surrounds from the factory but not on the left.
A small thing but the Z06 logo on the side vents is picked out in red but the "supercharged lettering is not.
Mine now is. I think it goes well with the red callipers.
Thanks :-) Yeah, it works really well, I like how the plate bends to reflect the angle at the front, same as the US plates. I used a modified C6 mounting plate on my C7. I ground of the edges and cable tied it to the grille. Then I stuck on the plate with pads.
I managed to get away with a small front plate on my C6 Zo6 for a couple of years then got fined £100 ,so I had to go with the full size on the C7.
I have also added some aluminium accents to the interior. The round knobs, the small panel on the left of the wheel and the surrounds of the air vents on the drivers side. Strangely the passenger side comes with the vent surrounds from the factory but not on the left.
A small thing but the Z06 logo on the side vents is picked out in red but the "supercharged lettering is not.
Mine now is. I think it goes well with the red callipers.
Vent surrounds: yeah - odd isn't it!
Slight Cock up HaHa .... I deleted a duplicate pic on IMGUR and had not realised it was an Album ....Here you go
I have a Graphic Artist Drawn me up a Red White and Blue 'Stars and Stripes' Skull along with a 36" X 8" 'SiriusXM Satellite Radio' Decal to go along the plane of the rear wing ....pretty much as the track car they are ready tomorrow and will be fitted over the Bank Holiday
I have a Graphic Artist Drawn me up a Red White and Blue 'Stars and Stripes' Skull along with a 36" X 8" 'SiriusXM Satellite Radio' Decal to go along the plane of the rear wing ....pretty much as the track car they are ready tomorrow and will be fitted over the Bank Holiday
C7KEN said:
Finally got the Left and Right Hand Stars and Stripes as I had the Right Hand one flying in 'Retreat'
Yes, interesting.Back in the day Lotus F1 team was racing in yellow "Camel" colors - check out the photo of Ayrton Senna's car on the link below. As you can see, the "camels" on the car generally stand with their heads to the left. This is the official Camel cigarette trade mark. However, some bright spark decided it would look better to have all the camels on the sides of the car facing with their heads toward the front - one camel is therefore facing to the right.
https://en.wikipedia.org/wiki/Lotus_99T#/media/Fil...
Incorrect use of a registered trademark weakens its strength. This issue was addressed and later versions of the same Camel Lotus get-up had all camels facing correctly to the left.....
https://www.flickr.com/photos/84938363@N00/5508424...
http://www.modelersite.com/en/1275/scratchbuilding...
I had No Idea there was a right and a wrong for the Stars and Stripes ...but I'm Savvy Now Steve..... I was watching F1 back in the day and again never knew about the correct Facing for the Camel Logos .....
I Decided to Swop out the Round Leather Steering Wheel for a Hunky Chunky Black Alcantara 'Suede' 'D' Shape which had by Chance 'Red' Stitching .,...Really Nice Feel to her from 'HandKraftd' it comes Bare so I decided to tackle it myself .....I had a 3/4" to 1/2" Drive Reducer with a Torx50 and a Hefty 3/4" bar ....winding the wheel fully to the left she Cracked Off. I swopped out the Switch Gear, Controls and Paddles [Rev Match]
Air Bag/Horn with trim tools. Very Pleased with that as it improves the Driving Experience it's got a really Nice feel to it.
I Decided to Swop out the Round Leather Steering Wheel for a Hunky Chunky Black Alcantara 'Suede' 'D' Shape which had by Chance 'Red' Stitching .,...Really Nice Feel to her from 'HandKraftd' it comes Bare so I decided to tackle it myself .....I had a 3/4" to 1/2" Drive Reducer with a Torx50 and a Hefty 3/4" bar ....winding the wheel fully to the left she Cracked Off. I swopped out the Switch Gear, Controls and Paddles [Rev Match]
Air Bag/Horn with trim tools. Very Pleased with that as it improves the Driving Experience it's got a really Nice feel to it.
Had a Great day at Rockcliffe Hall Supercar Show ....We where asked by ARCUS [American Cars-R-Us NE] to form up at a location nearby having assembled C1 thru C7 Corvettes. The Show was to Benefit Children and they where all waiting for us to arrive down the Main Drag .....The Look on their faces, Waves, Smiles and Enjoyment made it so worthwhile .... many Wheelchair Bound but the excitement and Happiness was great to see ...we arrived in Convoy Blipping the cars waving in return.
Ferrari's, Porches, McLaren's, Aston Martins and more all raising money for the Kids made it enjoyable for Kids and the 'Petrolheads' too
Ferrari's, Porches, McLaren's, Aston Martins and more all raising money for the Kids made it enjoyable for Kids and the 'Petrolheads' too
C7KEN said:
I had No Idea there was a right and a wrong for the Stars and Stripes ...but I'm Savvy Now Steve..... I was watching F1 back in the day and again never knew about the correct Facing for the Camel Logos .....
I Decided to Swop out the Round Leather Steering Wheel for a Hunky Chunky Black Alcantara 'Suede' 'D' Shape which had by Chance 'Red' Stitching .,...Really Nice Feel to her from 'HandKraftd' it comes Bare so I decided to tackle it myself .....I had a 3/4" to 1/2" Drive Reducer with a Torx50 and a Hefty 3/4" bar ....winding the wheel fully to the left she Cracked Off. I swopped out the Switch Gear, Controls and Paddles [Rev Match]
Air Bag/Horn with trim tools. Very Pleased with that as it improves the Driving Experience it's got a really Nice feel to it.
Do you have to disable somehow the air bag before you remove it? Or do you just disconnect the battery?I Decided to Swop out the Round Leather Steering Wheel for a Hunky Chunky Black Alcantara 'Suede' 'D' Shape which had by Chance 'Red' Stitching .,...Really Nice Feel to her from 'HandKraftd' it comes Bare so I decided to tackle it myself .....I had a 3/4" to 1/2" Drive Reducer with a Torx50 and a Hefty 3/4" bar ....winding the wheel fully to the left she Cracked Off. I swopped out the Switch Gear, Controls and Paddles [Rev Match]
Air Bag/Horn with trim tools. Very Pleased with that as it improves the Driving Experience it's got a really Nice feel to it.
Gassing Station | Corvettes | Top of Page | What's New | My Stuff