Handbrake Clips
Discussion
Number 14?
looks like there should only be one and I don't recall my car even having that
Haynes Sierra manual doesn't mention any clips in the "Handbrake cable replace" chapter.
Phillpot is not a horrorcle, he's the Phount of Nollidge about all that is StainleSS in the world of the S.
Now he's even branching out into the realms of spring steel. And it's still winter!
And he really knows how to Google.
Yes sir, he can google, and he rarely gets it wrong.
He can google, he can google all night long.......
Now he's even branching out into the realms of spring steel. And it's still winter!
And he really knows how to Google.
Yes sir, he can google, and he rarely gets it wrong.
He can google, he can google all night long.......
Hi All
Thanks for the help, last night I found some of these and are perfect for the job.
img]http://thumbsnap.com/sc/YBiWbQup.jpg[/img]
The clip ia a perfect fit to retain the cable end
Alan
Thanks for the help, last night I found some of these and are perfect for the job.
img]http://thumbsnap.com/sc/YBiWbQup.jpg[/img]
The clip ia a perfect fit to retain the cable end
Alan
Edited by Alan Whitaker on Thursday 22 January 15:48
Hi Mike
Don't think so, I know the way TVR did it was to run the adjuster in the other one and run the O/S cable outside the chassis using a piece of outer cable between the body and chassis.
I deceided to put the adjuster there so both cables are remobable from the inside of the car, there is a removable piece in the center dash for storage, it just pops out to remove or adjust.
Alan
Don't think so, I know the way TVR did it was to run the adjuster in the other one and run the O/S cable outside the chassis using a piece of outer cable between the body and chassis.
I deceided to put the adjuster there so both cables are remobable from the inside of the car, there is a removable piece in the center dash for storage, it just pops out to remove or adjust.
Alan
Hi Mike,
On mine there were 2 brackets, one was inside the chassis (which I am using with the E clip)and one on the O/S outside where the trailing arm mounts, the cable had a extra piece of outside sheave where it ran between the chassis and body to stop the cable from rubbing, nothing like you have in the pictures, could be the way TVR did it.
I thought the 2 nylon nuts were there to lock it in place??
Alan
Thanks Mike, Will change it to how it should be
On mine there were 2 brackets, one was inside the chassis (which I am using with the E clip)and one on the O/S outside where the trailing arm mounts, the cable had a extra piece of outside sheave where it ran between the chassis and body to stop the cable from rubbing, nothing like you have in the pictures, could be the way TVR did it.
I thought the 2 nylon nuts were there to lock it in place??
Alan
Thanks Mike, Will change it to how it should be
Edited by Alan Whitaker on Friday 23 January 08:39
Gassing Station | S Series | Top of Page | What's New | My Stuff