Interior/Exterior personal touches..
Discussion
Just a few lil things ive added & changed over along the way, having some new decals done & a custom tvr sunstrip (to hide milkyness in corner of windscreen ) but wont be for a few weeks yet will post up some pics when i get them.
Got these from amazon along with some iron on badges for around £10 cheap as chips but look rather neat
'Iron on' TVR badges for the mats, (forgot to add the logo when i ordered them from autostyle)
British born, british made
Decided on changing the typical amber lenses to clear, with the appropriate bulbs, i used osram chrome amber to eliminate the 'fried egg' effect
Side repeaters changeover, a lil fiddly but end result looks tidy & a much tighter seal than my original which were rattling about like a junkie waiting on a fix
After searching around for stainless steel wheel nuts (and failing) act couldn't get hold of any when i rang up, i got some zinc coated ones off ebay which tidy it up for now
before
after
Got these from amazon along with some iron on badges for around £10 cheap as chips but look rather neat
'Iron on' TVR badges for the mats, (forgot to add the logo when i ordered them from autostyle)
British born, british made
Decided on changing the typical amber lenses to clear, with the appropriate bulbs, i used osram chrome amber to eliminate the 'fried egg' effect
Side repeaters changeover, a lil fiddly but end result looks tidy & a much tighter seal than my original which were rattling about like a junkie waiting on a fix
After searching around for stainless steel wheel nuts (and failing) act couldn't get hold of any when i rang up, i got some zinc coated ones off ebay which tidy it up for now
before
after
Just leatherette mate, yeah theyd look sweet on the red seatbelt, here's the exact link I got them from.. http://www.amazon.co.uk/Black-LEATHER-Leatherette-...
the rev counter would not work with the new cossy engine
the speedo would not work with the new MT75 box and different diff ratio
I needed to very quickly access the gear linkage when a bolt snapped - the dash would not move out of the way
smoothed front bumper and led sidelights and indicators
I have a few more too
the speedo would not work with the new MT75 box and different diff ratio
I needed to very quickly access the gear linkage when a bolt snapped - the dash would not move out of the way
smoothed front bumper and led sidelights and indicators
I have a few more too
Edited by magpies on Wednesday 30th September 22:00
greyhulk said:
Now that looks ace! I think the old amber side repeaters look a tad outdated, your oval ones look neat
Thanksgreyhulk said:
I was considering them myself, did you have to adapt the original hole in fibreglass at all?
I used some modern ford ones (fiesta I think). No adaptations in the fibreglass needed but strangely one ended up slanty so had to cut some lugs off the new repeater unit to make them level. Scoobimax said:
I used some modern ford ones (fiesta I think). No adaptations in the fibreglass needed but strangely one ended up slanty so had to cut some lugs off the new repeater unit to make them level.
think i nearly got the same ones off ebay but weren't sure if they would of fitted without tweaking the fibreglass hole abit, i had trouble getting the original ones out with them lil clips on the inside i pressed them both in but just wouldn't budge, ended up snapping one off to ease them out. oh and nice alloys what size are they?
Gassing Station | S Series | Top of Page | What's New | My Stuff