Quickshifter

[pshep70]

Hi all

started a new job so not been on for a while.

@kitschki - Did I miss out on this batch? Any chance of another run?

1. member Type Year Paid? Delivered?

01 pshep70 S3 1991 - -
02 fozzy280472 s3 1992 - -
03 Scubaman04 s3c 1992 - -
04 S2ANDY S2 1990 - -
05 Marc C S3C 1990 - -
06 Longers S3C 1990 - -
007 AutoAndy S3C 1991 - -
08 TVR-Stu S3C 1990 - -

[Kitchski]

The wheels are in progress

Going to be a run of 9 to start with, with hopefully more to follow. Work should start later this week/early next week.

[phillpot]

For the price you can do these for guess you're not making "from scratch" ?


Buying in something like this and modifying to suit TVR?




Being a cheapskate (and yours weren't available back then) I did mine with one of these, bit more of a "flaff" but guess end result is similar

[pshep70]

Kitchski said:

The wheels are in progress

Going to be a run of 9 to start with, with hopefully more to follow. Work should start later this week/early next week.

[Kitchski]

pshep70 said:

Hi all

started a new job so not been on for a while.

@kitschki - Did I miss out on this batch? Any chance of another run?

1. member Type Year Paid? Delivered?

01 pshep70 S3 1991 - -
02 fozzy280472 s3 1992 - -
03 Scubaman04 s3c 1992 - -
04 S2ANDY S2 1990 - -
05 Marc C S3C 1990 - -
06 Longers S3C 1990 - -
007 AutoAndy S3C 1991 - -
08 TVR-Stu S3C 1990 - -

Just tried to email you, but it says you don't 'permit' them

For anyone else on the list, I'm just sending out the initial emails. I'll be able to satisfy all the orders on that list for now. Production is starting this afternoon.

Thanks

[Elfit]

Could I be added to the list please?
1990 S2

I'll send an off board message too

Cheers
Tim

[Garytooms]

Hi there are you still making the kit would it fit an s3 1991 2.9

Thanks Gary

[Kitchski]

Garytooms said:

Hi there are you still making the kit would it fit an s3 1991 2.9

Thanks Gary

It would fit, yes. I think all the slots are already reserved, but will touch base after a quick stock check and see if we have any left. We'll do another batch before long anyway.

[Craig Brown Photographer]

Me too Richard, Cheers Craig

[Craig Brown Photographer]

Me too Richard, Cheers Craig

[Coyopa]

Can i put my name down too please!

S2 1990

[Kitchski]

Best thing is for anyone who wants to be added to the list to either email me directly, or add their name to the Wiki:

https://www.pistonheads.com/gassing/topic.asp?h=0&...

[S2Andy]

Arrived today.
Very well packaged. Took an age to unwrap lol.
Looks a very nice bit of kit.
Will hopefully fit next week.

[fozzy280472]

Hi Rich,
Quickshifter arrived today ...do you think you could get any more tape on the package !!!
Seriously though, I will hopefully fit this tomorrow with the new saddle .... looking forward to seeing the result
Nicely made and worth the money judging by other people's results.
Thanks for this Rich.
Cheers mate.

[Kitchski]

I can confidently say the packaging was not me

Thanks guys, enjoy

[Steve_D]

I'll take a little stick for my over-packaging rather than people receiving damaged items.

Steve

[glenrobbo]

Steve_D said:

I'll take a little stick for my over-packaging rather than people receiving damaged items.

Steve

I saw what you did there Steve!

Remind me never to get into any bondage games with you!

[Scubaman04]

Got mine yesterday too, took ages, to get in it, but worth it when I did. Thanks again guys

[fozzy280472]

Well ...quickshifter and new saddle now fitted ....wow , what a difference. Gearchanger is SO much more precise with an excellent " solid feel "on selection . Reverse selection is superb now .
Definitely the best mod I've done on the car .
The only issue was the old selector was fitted with large torx headed screws which had been put in by King Kong .
One was damaged by the time I got them out so I replaced the aft bolt with a standard hex head bolt which means it can easily put in and removed with a snap on 13mm wobbly socket so no fibreglass needs cutting or holes made.
Anyway it's an easy job , 2 hours in total including the bother with the stuck bolt .
Fantastic job Rich thanks very much ....if anyone is thinking of converting to one of these....do it ....it's worth it .

[S2Andy]

Paul, Just about to do mine with new saddle also. Is it difficult to remove the old saddle? Probably worrying unnecessarily.