Problem starting (another) 2.8i S1

Problem starting (another) 2.8i S1

Author
Discussion

bondingi

Original Poster:

41 posts

257 months

Friday 13th December 2002
quotequote all
Car will start but it runs like it is on full choke and so wont run smoothly. If it doesnt start first time then it floods staright away. Bemused by the injection system and dont know where to start!!

joospeed

4,473 posts

279 months

Friday 13th December 2002
quotequote all
warm up regulator..

Justin S

3,642 posts

262 months

Friday 13th December 2002
quotequote all
could be the throttle pot.Seemed to not run on mine and was very rich out the exhaust.New one fitted and hey presto....

Chingers

136 posts

284 months

Saturday 14th December 2002
quotequote all
You might also try the auxiliary air device which is effectively the choke on the 2.8. It's mounted on the front of the air box on top of the engine and looks like a metal bracket with an electrical connection on one side and a hose connection on each side. If you warm up the engine and disconnect the hoses then look through from one side to the other - you shouldn't be able to see any daylight. If you can then either it has seized open or the electrical supply to the bi-metal strip which closes it may be faulty.
In general the control mechanisms on the 2.8 are much simpler than on the 2.9 and are well described in either the bible or a relevant Haynes manual.
Hope thats of use.
Chris

bondingi

Original Poster:

41 posts

257 months

Sunday 15th December 2002
quotequote all
Thanks everyone but a question to Justin S, what is the Throttle Pot?

bills1

305 posts

271 months

Sunday 15th December 2002
quotequote all
They are found on 2.9 which have a far more complex electronic fuel injection system.