AVO/Springs question
Discussion
Two totally different bushes being talked about here RA3AVO here with the tapers (and RA6 AVO on the classics) with the the root cause having been presumed here to be the circlip grooves as a riser to the failure (slimmer eyelet and 2 circlip grooves). My understanding was that AVO changed the design to the later eylet to, spread the load and not have the circlip grooves (as said it does not appear to cured the basic bush issue). A@
Edited by Adrian@ on Thursday 21st July 13:42
Adrian@ said:
Two totally different bushes being talked about here RA3AVO here with the tapers (and RA6 AVO on the classics) with the the root cause having been presumed here to be the circlip grooves as a riser to the failure (slimmer eyelet and 2 circlip grooves). My understanding was that AVO changed the design to the later eylet to, spread the load and not have the circlip grooves (as said it does not appear to cured the basic bush issue). A@
Yes, the common issues are AVO and the bush spec. If the bushes break up like mine did then there’s a bit of an issue. Edited by Adrian@ on Thursday 21st July 13:42
Gassing Station | S Series | Top of Page | What's New | My Stuff