Who's for Shafto's
Discussion
pbirkett said:Shafto's is a pub in the grounds of Whitworth Hall Country Park
Pardon my obvious ignorance, but whats Shafto's?
www.whitworthhall.co.uk/
From the A1 Motorway
At junction 61 take the A688 "Spennymoor".
After joining it, follow A688 "Spennymoor" over 4 roundabouts.
At the 5th roundabout, take the 4th exit, right, "Spennymoor Town Centre".
At the next major roundabout turn left, first exit, "A688 Bishop Auckland"
After ¾ mile turn right at the traffic lights following brown signs "Whitworth Hall Hotel" which is on the right after 1½ miles.
From Durham
From the A690 towards Crook take the first left after Brancepeth Village.
Following the brown signs "Whitworth Hall Hotel" which is on the left after 2 miles.
At junction 61 take the A688 "Spennymoor".
After joining it, follow A688 "Spennymoor" over 4 roundabouts.
At the 5th roundabout, take the 4th exit, right, "Spennymoor Town Centre".
At the next major roundabout turn left, first exit, "A688 Bishop Auckland"
After ¾ mile turn right at the traffic lights following brown signs "Whitworth Hall Hotel" which is on the right after 1½ miles.
From Durham
From the A690 towards Crook take the first left after Brancepeth Village.
Following the brown signs "Whitworth Hall Hotel" which is on the left after 2 miles.
Well I trust is matches then. What else did you have done?
[hijack]
ps if ChrisJ is watching, how is your engine? I know you do other things on thursday, but from someone who's seen it in the flesh, would be nice to see the marcos on the road again. Any progress?
[/hijack]
Shall I invite all the lotus owners from work??
[hijack]
ps if ChrisJ is watching, how is your engine? I know you do other things on thursday, but from someone who's seen it in the flesh, would be nice to see the marcos on the road again. Any progress?
[/hijack]
Shall I invite all the lotus owners from work??
I got the bonnet fixed, replaced the running board, and had the windscreen surround de-rusted and resprayed (it would appear they forgot to spray underneath after they had prepped it mind).
Next job for me is to jack the back of the car up, clean up all the metal by removing the flaky rust and coat the whole lot in POR 15 to make it good for the Winter, Re-stick the roof and generaly fiddle on
Next job for me is to jack the back of the car up, clean up all the metal by removing the flaky rust and coat the whole lot in POR 15 to make it good for the Winter, Re-stick the roof and generaly fiddle on
tvrbob said:Rear end and off side front done. Should finish front near side today. Looks like I'll be there in my p&j and I won't be worried about wet roads and TVR outriggers. I wish TVR would use something more flexible to paint the wheel arch framework. Hammerite and stone chips don't mix.
I'm putting mine up on stands this weekend to hammerite and waxoil.
I'll be there around 19:30 provided I don't get lost again.
Gassing Station | North East | Top of Page | What's New | My Stuff