Talk to me about 400SE radiators..

[350Wedge]

Picked the car up yesterday and it was indeed £150 for the recore and a modification to fit a screw in temperature sender rather than a clip in one. Removal and re-fitting was on top of that but a good job done

Very tricky to get any pics now its back in situ but will attempt to get some once its stopped raining!!

[1 Finger Bandit]

Refitted last night with the help of Hotty

What a challenge !

[adam quantrill]

Well my recore has given up the ghost after only 12 years! Terribly shoddy.

So I was thinking maybe a SIerra Cossie one, but is this what I should be ordering: https://www.ebay.co.uk/itm/265045408530

ALUMINIUM RADIATOR TO FIT

FORD SIERRA RS COSWORTH 2WD & 4WD

DIMENSIONS 640 x 308 x 50

P.S. Cue the Rev, in 3, 2, 1...

Edited by adam quantrill on Monday 11th December 21:14

[KKson]

Hi Adam, large bore feed and return connections look correct. What about the small bore bleed line that attaches top offside? Cheers

[adam quantrill]

Good point. What I might do is mount it upside down, then use what looks like a blanked-off plug in the corner.

From the drawings it's an M22 x 1.5 thread. So it should be a simple matter to make an adapter brazed or soldered together with a pipe on it.

[rev-erend]

adam quantrill said:

Well my recore has given up the ghost after only 12 years! Terribly shoddy.

So I was thinking maybe a SIerra Cossie one, but is this what I should be ordering: https://www.ebay.co.uk/itm/265045408530

ALUMINIUM RADIATOR TO FIT

FORD SIERRA RS COSWORTH 2WD & 4WD

DIMENSIONS 640 x 308 x 50

P.S. Cue the Rev, in 3, 2, 1...

Edited by adam quantrill on Monday 11th December 21:14