350i Front tie rod bushes
Discussion
Hi mate..You will have a job getting the inner washers with the collars..I did manage to get the last two in the country, I was going to see if i could get some copies machined up..I also had 4 of the outer washers sent to me by a fellow PH'er but they never arrived in the post...The bushes are Cortina mk4-5...Do i want to risk sending out the last two washers in case they get lost...
Ill have to think about this one...Ziga
These are the outer washers...It should be 2 x Inner with collars 2 x Outer (as shown) per side.
http://www.ebay.co.uk/itm/Superflex-Bushes-Ford-Co...
Ill have to think about this one...Ziga
These are the outer washers...It should be 2 x Inner with collars 2 x Outer (as shown) per side.
http://www.ebay.co.uk/itm/Superflex-Bushes-Ford-Co...
Edited by mrzigazaga on Thursday 30th October 22:33
Thanks all above comments.
on it's '89 Goodyears with no treadwear btw!
It'll be on new rubber for the mot so if anyone needs a set for historic purposes?
GV said:
Remember to count the rotations when you undo the nuts as by all accounts the Castor angle will be affected otherwise.
got to get the geo's set up so I'm not too fussed as long as it rollson it's '89 Goodyears with no treadwear btw!
It'll be on new rubber for the mot so if anyone needs a set for historic purposes?
Gassing Station | Wedges | Top of Page | What's New | My Stuff