Which is in, which is out?
Discussion
V6 280i, I'm confused on which are the intake and which are the exhaust rockers. Must be getting old because I've had this since 1986 and I've adjusted the valves before but I'm lost now. The bible and workshop manual are both no help. There is still a foot of snow outside the garage so I've got time but was bored on a Saterday afternoon and wanted to tackle a project. I got the valve covers off and stood there like an idiot not knowing which was which. Thanks for the help.
Thanks for responding but I don't have access to a Haynes Granada manual here and the exhaust manifold was still a toss up guess. You guys seem to have your cars apart more than me, it's still in great shape except for the oil drip from the gearbox that I can't track down yet.
Thanks.
Thanks.
Correction; it's 4&5 NOT 5&6 which are siamesed. Here you go....
If the oil drip is around the area to the front of the gear box it may simple down to a weeping rocker box gasket allowing oil to run down the back of the block and down the bell-housing.
If the oil drip is around the area to the front of the gear box it may simple down to a weeping rocker box gasket allowing oil to run down the back of the block and down the bell-housing.
tvr-280i said:
... You guys seem to have your cars apart more than me, it's still in great shape except for the oil drip from the gearbox that I can't track down yet....
But, if it aint broke don't fix it Gassing Station | Wedges | Top of Page | What's New | My Stuff