Exhaust pics of 2.8 tasmin fhc mk1
Discussion
Hi,the exhaust on the Tasmin I've just acquired seems very low about 3" off the ground.Has anyone pics of there exhaust showing the whole underside system but mainly the centre box and how it's held up/too the chassis.Whats the best sounding system to fit when replacement due? Thanks dave
What system do you have fitted to your car? The really early ones had a single silencer underneath the gearbox, slightly later ones had fabricated tubular 'log' manifolds and an above gearbox single silencer. Later cars had the Langford system which is a split system having a silencer under each seat then another two near the rear axle.
ATC have the Langford system on the shelf and can make you the other ones.
ATC have the Langford system on the shelf and can make you the other ones.
Mine is pretty low, more than 3” though. I flipped my manifolds around and cobbled the downpipes to ROW configuration to get rid of the converter and several clunks. The underseat mufflers were gone when I bought it. Had a shop replace the grody looking midpipes with something marginally better. Too loud and poppy. Needs some small resonators and a crossover.
The few hangers I have are ahead of the rear suspension and clamp around a transverse frame tube. I’ll have to look at the isolator. I should remember this.
The few hangers I have are ahead of the rear suspension and clamp around a transverse frame tube. I’ll have to look at the isolator. I should remember this.
Gassing Station | Wedges | Top of Page | What's New | My Stuff