What are doing on your wedge this weekend?
Discussion
In the spirit of “keeping the band back together” on PH lol
I thought I’d kick off a favourite thread……it’s Friday……what are you planning???
I’ll start
My SEAC runs a 72 or 74 degree thermostat (cannot remember which) and now the cold weather is here I’m considering swapping for an 82 degree one.…anyone done the same and if so what does it help?
With my current low temp stat my coolant is a rock solid 80 degrees always (running emerald) and my oil cooler opens / closes as required…….net net should I bother???
I thought I’d kick off a favourite thread……it’s Friday……what are you planning???
I’ll start
My SEAC runs a 72 or 74 degree thermostat (cannot remember which) and now the cold weather is here I’m considering swapping for an 82 degree one.…anyone done the same and if so what does it help?
With my current low temp stat my coolant is a rock solid 80 degrees always (running emerald) and my oil cooler opens / closes as required…….net net should I bother???
I run an 82C thermostat in my SEAC all year round.
I know some run a lower value with the idea that it helps prevent overheating when in traffic (lots about if this actually true of course), but most engines are designed to run with coolant temperatures of something in the region of 90C to 110C. I would therefore be more worried about overcooling/running rich in cold weather with a lower value so would support changing it.
I know some run a lower value with the idea that it helps prevent overheating when in traffic (lots about if this actually true of course), but most engines are designed to run with coolant temperatures of something in the region of 90C to 110C. I would therefore be more worried about overcooling/running rich in cold weather with a lower value so would support changing it.
Unfortunately no work planned on the SEAC this weekend as I'm under pressure to finish off the tiling and grouting in a new shower room. Might be tempted by a run out Sunday morning with the Worcester car club though.
Big job looming on the SEAC is dashboard out, so I can replace the heater matrix, which failed quite spectacularly earlier in the year in a cloud of steam.
Big job looming on the SEAC is dashboard out, so I can replace the heater matrix, which failed quite spectacularly earlier in the year in a cloud of steam.
Englishman said:
I run an 82C thermostat in my SEAC all year round.
I know some run a lower value with the idea that it helps prevent overheating when in traffic (lots about if this actually true of course), but most engines are designed to run with coolant temperatures of something in the region of 90C to 110C. I would therefore be more worried about overcooling/running rich in cold weather with a lower value so would support changing it.
For the 30 mins to swap over I’ll give it a go…..you never know it may make the heater warm up vs the mouse fart warmth lol I know some run a lower value with the idea that it helps prevent overheating when in traffic (lots about if this actually true of course), but most engines are designed to run with coolant temperatures of something in the region of 90C to 110C. I would therefore be more worried about overcooling/running rich in cold weather with a lower value so would support changing it.
adam quantrill said:
Some slight fettling for the MoT, check the lights, wipers, washers, adjust handbrake etc.
These days my weekends include Monday as I elected for a 4-day week, and it's great! I can highly recommend.
Adam, I've been 4 days a week for 4 years, but since 1st September I've semi retired and down to 2 days a week. You should see my bloody "to do" list, courtesy of the missus.....These days my weekends include Monday as I elected for a 4-day week, and it's great! I can highly recommend.
This weekend I am finishing tidying up the wiring on the new coil packs on my 400SE. I also run an Emerald ECU with the 82 degree thermostat. The Emerald switches on the fans at 94 degs. and off at 92 degs. The temperature sits steadily between the two, even in traffic. And the heater is lovely and hot.
I've been replacing the dampers on my FHC but obviously you can't put rusty stuff back on the car. Hopefully the wishbones will be dry tomorrow.
I've already done the RHS so should be good for a test drive shortly.
I really should put antifreeze back in it after changing the radiator in the summer.
I've already done the RHS so should be good for a test drive shortly.
I really should put antifreeze back in it after changing the radiator in the summer.
Gassing Station | Wedges | Top of Page | What's New | My Stuff