Swan neck filler cap

[andymadmak]

Any one got a clue which cap is used on the swan neck on a 91 400se? It looks like a radiator cap but it has no pressure valve bit.
The rubber is perished on mine and its leaking a bit. Is it a standard ford article? Is it a special TVR unit? can I get it from my local motor factors?

Cheers
Andy 400se

[jmorgan]

I took my 350 one down the local factors and it was off the shelf. Matched it up at the shop.

[andymadmak]

Ta muchly!

Andy 400se

[nick heppinstall]

Andy. Let me know if you need any info. I always carry a spare around with me ! Can mail you when I get in.

[bhardy]

Hello,

I had the same problem with my 350, the coolant leaks from underneath the filler cap. After some searching it appears to be a QH part, i bought a new one and have had no problems since. If you need the number let me know, i'll find out which number it is.

Greetings
Bernard

[andymadmak]

Got One!

Thanks everyone.
Nearly time to start the long (65miles) noisy (roof off) drive home.
can't wait !

Andy 400se

[arcturus]

Same problem with my 350i. Quinton Hazell part no is QH57 or the Powertrain equivalent, which I had to use 'cos the QH one was not available at the time, is PCRC1.

Sniffer