Recommendation for LUCAS engine ECU overhaul - Chim 400???
Discussion
Thanks for everybody's help & input, particularly Mark (Blitzracing).
The Chimaera is now (fingers/toes crossed) fixed. It turned out that the fault was being caused by a faulty injector. Having fitted a set of freshly refurbished items, it is now running A1. Very annoying as we swapped the original set round with 8 from a car running fine and the same problem persisted.
Anyhoo, all's good now.
Thanks again for everyone's input.
The Chimaera is now (fingers/toes crossed) fixed. It turned out that the fault was being caused by a faulty injector. Having fitted a set of freshly refurbished items, it is now running A1. Very annoying as we swapped the original set round with 8 from a car running fine and the same problem persisted.
Anyhoo, all's good now.
Thanks again for everyone's input.
I suspect you had a wiring/connection fault rather than the injector itself, seeing as the one's you swapped originally from a well running car also played up in your car, you possibly fitted new one's now but electrically connected them fully this time, recheck the connectors to save further issues.
You also may wish to read this thread, it may be relevant.
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
fatboychim said:
You also may wish to read this thread, it may be relevant.
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Thank you very much for this link.http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff