wishbones from mr_quick, new ..
Discussion
Vixen ones don't fit certain vixen chassis
I know from experience.
This is not a slight against Mr Quicks considerable skill or experience but the way that the wishbones were made from patterns..
If you are buying vixen wishbones you should buy from the same source as the chassis…if the chassis is a replacement.
They may however fit original 60's chassis
The problem wasn't catastrophic but my advice would be to trial fit everything before finishing since chassis bracket tweaks were required..
Mr quick may not be aware of this because the patterns were sent by an intermediary who had them made for me.
N.
I know from experience.
This is not a slight against Mr Quicks considerable skill or experience but the way that the wishbones were made from patterns..
If you are buying vixen wishbones you should buy from the same source as the chassis…if the chassis is a replacement.
They may however fit original 60's chassis
The problem wasn't catastrophic but my advice would be to trial fit everything before finishing since chassis bracket tweaks were required..
Mr quick may not be aware of this because the patterns were sent by an intermediary who had them made for me.
N.
Edited by Dollyman1850 on Friday 12th December 20:54
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff