Random TVR Pics (Vol 2)

[GAjon]

Let off some steam Bennett said:

Got them wheels on the Challenge car !

[Griff43V8]

Let off some steam Bennett said:

Looks rather nice, if done commercially what sort of ball park price to strip and paint?

thx

[Byker28i]

Let off some steam Bennett said:

Need bigger wheels - those don't fill the arches

[Let off some steam Bennett]

TR4man said:

Hope your car will be finished soon, then they can get on with mine!

They did mention you were next, they are hoping to have mine done by the end of May

[TR4man]

Let off some steam Bennett said:

TR4man said:

Hope your car will be finished soon, then they can get on with mine!

They did mention you were next, they are hoping to have mine done by the end of May

Mine is only waiting for outriggers, suspension arms, bushes and a service and MOT, so I’m hoping that it will be ready for the Laon Historique in May (I’d like it back for the Donington Festival the week before if possible).

[Let off some steam Bennett]

Byker28i said:

Need bigger wheels - those don't fill the arches

Tyres are cheap though

[Let off some steam Bennett]

TR4man said:

Mine is only waiting for outriggers, suspension arms, bushes and a service and MOT, so I’m hoping that it will be ready for the Laon Historique in May (I’d like it back for the Donington Festival the week before if possible).

I'm nipping up to Sportmotive on Friday so i will have news

[lancepar]

Just received a call from the Guy in the Orkneys that took over the resto of the Chim' I lost interested in finishing someone else's failed resto.
It's ready for him to collect, just needs the Megasquirt mapped to pass a MOT.
When the bodyshop sends him a photo of the finished car, he's going to send me a copy..
I'll post it here when I get it.

This was it when I had it.



Sounds like it will be brill and considering what has been done to it worth mega bucks.

I joked with him as to where on the Island of Sanday is a road he will get out of 2nd gear

[Byker28i]

Hum not sure about the roads
https://www.bbc.co.uk/news/uk-scotland-highlands-i...

[lancepar]

He says there is one decent one that has to be shared with others, with and without wheels

[2 sMoKiN bArReLs]

[macdeb]

Blast from the past.

[GTRene]

came across those in a car add, look at that exhaust... equal length I guess, hah.

makes also decent power at the wheels

said:

Built on a bespoke Chrom-moly chassis with fully adjustable suspension, Penske Shocks, all steel dry sumped race engine, delivering 154 BHP power to rear wheels via Quaife dog engagement 4 speed transmission, AP twin plate sintered clutch, lightened flywheel, alloy bellhousing and Titan hydraulic clutch slave cylinder.

[Sardonicus]

Lovely ole X flow in there

[GJL]

8Speed said:

GTRene said:

[GTRene]

I just spotted today a Dutch site, and you can see all the Dutch car importers before 1980...

so I looked at TVR and saw that they had 7 TVR dealers before 1980! I never knew that.

they could find some old TVR ads from almost most old dealers like say those ads, I thought I borrowed those and put them here to show :-)

[2 sMoKiN bArReLs]

[GTRene]

[lancepar]

M255FUB
Wow++++++++ looking 100% better than when I first collected it.

[miniman]