Something Missing.
Discussion
MikeE said:
lancepar said:
Iain I've sent Autovaux an email, cheers.
Missing on mine too. Let us know if they have supplies and I’ll get one too. The other bit I’m missing is the black plastic cowling from the seat reclining mechanism, what Vauxhall’s is that form?
There are a number of outlets that can supply the seat adjusted covers, from NOS (Mega Bucks) to GRP Repro's, (A PHer) and latest I've seen is from Amore, I think 3D printed.
I even got a quote from an Injection molding company but didn't follow it up.
I have one and a broken one I borrowed from the sold Chim' until I found some for the Griff'. Nothing done yet though.
bobfather said:
In one of those photos of missing neoprene part and perhaps both photos it looks like the neoprene part is there, it may have been pushed into the cowl along the lock barrel
Why didn't I listen to you Bob?I got a new escutcheon from ebay (cheapest) and because i needed to take the cowl off to see why the barrel was not in the centre of the opening in the cowl, guess what I found, yep another one.
The problem with the lower cowl sitting too low was a wire terminal between the plastic fixing boss and the steering swivel, don't know where the wire went to so I reattached it out of the way.
BTW the most expensive escutcheon I found was £10.00 +Vat+P&P
Another job sorted.
2 sMoKiN bArReLs said:
I couldn't resist to take a look...
Steve I think your's has been shoved in as well after having a good look at your enlarged photo as others suggested.MikeE said:
Missing on mine too. Let us know if they have supplies and I’ll get one too.
Mike yes, Autovaux have them but they were cheaper, I like cheaper....... on ebay.https://www.ebay.co.uk/itm/GENUINE-VAUXHALL-ASCONA...
Bit of a panic when it didn't arrive on time due to you know what.
lancepar said:
2 sMoKiN bArReLs said:
I couldn't resist to take a look...
Steve I think your's has been shoved in as well after having a good look at your enlarged photo as others suggested.MikeE said:
Missing on mine too. Let us know if they have supplies and I’ll get one too.
Mike yes, Autovaux have them but they were cheaper, I like cheaper....... on ebay.https://www.ebay.co.uk/itm/GENUINE-VAUXHALL-ASCONA...
Bit of a panic when it didn't arrive on time due to you know what.
lancepar said:
.
The problem with the lower cowl sitting too low was a wire terminal between the plastic fixing boss and the steering swivel, don't know where the wire went to so I reattached it out of the way.
Trawling the messages I found what I think was the purpose of this black wire from an old message from Aussie JohnThe problem with the lower cowl sitting too low was a wire terminal between the plastic fixing boss and the steering swivel, don't know where the wire went to so I reattached it out of the way.
Aussie John said:
Found the horn faulty again, this time found that the earth does not go through the column to the rack, late models seem to have an earth wire off the top section of the tilt mechanism so I put one in and problem seems to have been solved, thanks for all the help,
Only on my car it had been attached to the underside of the tilt mech' maybe to solve a intermittent honker sometime in its past.Only updated as it may help owners with horn issues.
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff