ANYONE GOT A TVR TOOLKIT??

[T6USK]

Hi All

Just got myself one off ebay as a crimbo pressie, but there might be a part missing thus misdescribed when said complete. When the case is open, the top right corner square cut in the foam does not contain anything (was covered up in the ad photo). Should it have something in there, or is it there to allow extra space for the bulbs in the bottom right corner for when the case is closed up ??

Would appreciate some help from someone who has one of these toolkits....

Cheers

Chris

[2 sMoKiN bArReLs]

They're all like that. If you look it fits the part opposite.

[2 sMoKiN bArReLs]

[2 sMoKiN bArReLs]

For part opposite read "bulbs"

[T6USK]

Cheers mate

Although the kit I've recently seen from another Tivver had a shallow perfectly fitting perspex container in this hole, holding clear self adhesive strips I think ?? (for covering stone chips etc) ?? Maybe this was just something a previous owner put in there....

[S6 Devil]

I have one of these kits anmd have never worked out what the tool directly under the torch is for. Could someone enlighten me?

[2 sMoKiN bArReLs]

S6 Devil said:

I have one of these kits anmd have never worked out what the tool directly under the torch is for. Could someone enlighten me?

Removal of bonnet

[fairclp]

2 sMoKiN bArReLs said:

S6 Devil said:

I have one of these kits anmd have never worked out what the tool directly under the torch is for. Could someone enlighten me?

Removal of bonnet

...of Tuscan.

My square hole was empty too, but room for bulbs makes sense.

[S6 Devil]

2 sMoKiN bArReLs said:

S6 Devil said:

I have one of these kits anmd have never worked out what the tool directly under the torch is for. Could someone enlighten me?

Removal of bonnet

Aaah the two top main bonnet clips. of course!

[tejr]

Wheres the duck tape and WD40?!

[ridds]

Is the hole not there to allow the bulbs to fit as they stick up out of the lower section?

It's exactly opposite them when the lid is shut.

[2 sMoKiN bArReLs]

ridds said:

Is the hole not there to allow the bulbs to fit as they stick up out of the lower section?

It's exactly opposite them when the lid is shut.

Keep up at the back

[ridds]

In my defence the first reply didn't actually mention the bulbs....

Must use more smileys, then I might get away with replies like that in future...

[ridds]

And now a double post that I can't delete as I'm on my phone!

Edited by ridds on Sunday 12th December 19:50

[Dr Wolff]

In the Griffith toolkit, that square hole contains the key for removing the wheel centre caps.

[verminator]

I've never thought about it before, but did the cerbera ever have a tool kit?

[2 sMoKiN bArReLs]

verminator said:

I've never thought about it before, but did the cerbera ever have a tool kit?

The tool kit came as standard with Tuscan. I don't believe a kit came "free issue" with Chimaera, Griffith or Cerbera?

[tuscandani]

Can someone advise me what the top 3 items are please and what is a likely price to buy a TVR tool kit these days please? Thanks

[Byker28i]

Picture of one here?
https://www.busby.co.uk/sale-lots/19825/TVR%2Bcar%...

[tuscandani]

Byker28i said:

Picture of one here?
https://www.busby.co.uk/sale-lots/19825/TVR%2Bcar%...

Yeah, thank you. Saw that but that was 2015. Good find for the purchaser. Do you know what the top three items are ? Looks like black cellotape from the top left.