Mk 1 Fiesta front suspension arms

[zzr]

I've just fitted, well partially fitted my new engine into the car which has a bigger sump that is touching on the front drivers tie bar, I'll have to modify this to get enough clearance, but wondered if anybody on here has managed to convert the tie bar set up to an anti-roll bar arrangement. I beleive this was once available from the Ford Motorsport catalogue, but don't have the details. Are there any components from other cars that could be modified to fit.

Any help/advice appreciated.

Paul

[grahambell]

Quantum converted the Mk1/2 Fiesta front suspension to anti-roll bar by using Mk 4 (I think) Escort track control arms and anti-roll bar, though I think a part had to be modified on an exchange basis.

As far as I know this set-up is still in use on the Quantum 2+2 so might be worth contacting Quantum (www.quantumcars.co.uk)

[zzr]

grahambell said:

Quantum converted the Mk1/2 Fiesta front suspension to anti-roll bar by using Mk 4 (I think) Escort track control arms and anti-roll bar, though I think a part had to be modified on an exchange basis. As far as I know this set-up is still in use on the Quantum 2+2 so might be worth contacting Quantum (www.quantumcars.co.uk)

That's great, thanks.

Paul