Steel tubes for suspension bushes?
Discussion
Where can I get steel tubes into which nylon suspension bushed can be pressed?
I am making a cradle for a rear diff on a TVR 3000m that needs to use the existing pickup points/brackets, therefore will be suing 1" box section that will be welded to the tubes that hold the nylon or poly bushed.
I am making a cradle for a rear diff on a TVR 3000m that needs to use the existing pickup points/brackets, therefore will be suing 1" box section that will be welded to the tubes that hold the nylon or poly bushed.
A lot of the locost manufacturers provide these tubes for the suspension bushes which might be of use.
I have some on my site, and you can email me for a drawing if you like to check that they are suitable.
www.gtstuning.co.uk
I have some on my site, and you can email me for a drawing if you like to check that they are suitable.
www.gtstuning.co.uk
Gassing Station | Suspension, Brakes & Tyres | Top of Page | What's New | My Stuff