Pug 306 Electric Windows Fault.

Pug 306 Electric Windows Fault.

Author
Discussion

grumpy bert

Original Poster:

1,101 posts

226 months

Friday 8th December 2006
quotequote all
Hi,

I have a 97 306 LX that has developed a fault with the electric windows. The switch on the drivers door no longer makes either window work. The swtich on the passenger door still works the passenger door one.

This to me indicates a problem with the switch itself. I've taken it out and nothing appears loose or broken.

Is there anything else I can try before I get a new switch?

Can any one recomend a parts supplier? I've looked around on the internet but no where seems to stock them.

cheers
Rob

Rob_the_Sparky

1,000 posts

239 months

Friday 8th December 2006
quotequote all
Scrapyard or wanted ad on the relevant Pug forum would seem sensible. Also could try swapping the switches over if they are the same.

Ph1 Pug 306s can suffer from problems with broken wires in the flexiable wires from the body to the door (by the hinges). Usually leads to central locking issues forst but may be worth a look.

Rob

grumpy rob

Original Poster:

1,101 posts

226 months

Friday 8th December 2006
quotequote all
hi,

thanks for the response, I will take a look at the hinge wiring tomorrow. The local scrapy here seems to have gone downhill recently (stockwise). I'll try further afield and see if I can find one. cheers.



combemarshal

2,030 posts

227 months

Saturday 9th December 2006
quotequote all
You could try linking the connections out, get a multi meter find the feed and then just link it out (I think there are 3 connections, feed, open, close

busta

4,504 posts

234 months

Tuesday 12th December 2006
quotequote all
Swap the switches form the side that works (becuase its hardly been used preumably) to the side thats knackered and vice versa. Then just put up with the occasional moaning passenger.

New switch will be about 17pence from a scrapyard so its not the end of the world if you have to get one.

bluespanner

3,383 posts

224 months

Wednesday 13th December 2006
quotequote all
Rob_the_Sparky said:
Ph1 Pug 306s can suffer from problems with broken wires in the flexiable wires from the body to the door (by the hinges). Usually leads to central locking issues forst but may be worth a look.

Rob



Could this stop the electric mirrors moving aswell?

Rob_the_Sparky

1,000 posts

239 months

Thursday 14th December 2006
quotequote all
Not sure

combemarshal

2,030 posts

227 months

Thursday 14th December 2006
quotequote all
bluespanner said:
Rob_the_Sparky said:
Ph1 Pug 306s can suffer from problems with broken wires in the flexiable wires from the body to the door (by the hinges). Usually leads to central locking issues forst but may be worth a look.

Rob



Could this stop the electric mirrors moving aswell?

They had a 306 on autotrader (some car programe with Mike Brewer on) and a very simular thing happened on that, when you used the mirrors the central locking changed!!