MTB Tubeless - what I am doing wrong!
Discussion
take-good-care-of-the-forest-dewey said:
Ynox said:
I recently went tubeless on my mountain bike. Used the Muc Off kit for enduro rim widths. 2 wraps of rim tape and then seated the tyres (Schwalbe) by chucking a tube in initially.
Was a bit of a pain as I didn’t have an airshot at the time. Washing up liquid on the bead and pumping hard on my standard track pump with the valve out and I was able to seat the tyre with a bit of bouncing it up and down.
Zero leaks doing it this way so far (I saw some air escaping with one layer of tape before I put the sealant in).
Anyone got a recommendation of a good tubeless repair kit?
The one up stuff - steerer tube kit is the danglies (or pump based if you don't want to ta the steerer).Was a bit of a pain as I didn’t have an airshot at the time. Washing up liquid on the bead and pumping hard on my standard track pump with the valve out and I was able to seat the tyre with a bit of bouncing it up and down.
Zero leaks doing it this way so far (I saw some air escaping with one layer of tape before I put the sealant in).
Anyone got a recommendation of a good tubeless repair kit?
Amazing customer service too.
Gassing Station | Pedal Powered | Top of Page | What's New | My Stuff