Chavving up my S2K

Chavving up my S2K

Author
Discussion

MrFlibbles

Original Poster:

7,692 posts

284 months

Sunday 8th July 2007
quotequote all
One of the things that disappointed me on taking delivery of the S2k was the lack of aural delight.

My car currently has the standard exhaust and filter.

Its my daily driver, so I do a fair few motorway miles. For this reason, I'm happy to keep the exhaust standard as I cant be arsed with the "droning".

I noticed that the standard filter, is basically an induction kit enclosed in a cold air box with feed. So in the interests of science, I took the lid off the airbox and went for a little run out.

It makes so much difference, it sounds like the devil!

Only problem is (it warmish today) quite a noticeable drop in performance, certainly more than i'd accept in a trade off, so the lids gone back on.

Bearing this in mind, and my adversion to spending money, would drilling the air box (My oh my, I'm a 17 year old chav) give the extra volume without the downsides?


PJ S

10,842 posts

228 months

Sunday 8th July 2007
quotequote all
If you want CAI (cold air intake) with all the benefits of the "angry elephant" comforting your ears, then do it right and stop fannying about.
J's Racing, and others I can't think of right now (look or ask in s2k.com) would do the trick.
Engine heat soak on an open filter will (as you've already noticed) make things worse - hence why you need the likes of those mentioned above.

http://www.jsracing.co.jp/js3/index.asp?xMODE=SHOP...

havoc

30,094 posts

236 months

Sunday 8th July 2007
quotequote all
Hop over to s2ki's UK forum - they've discussed air intakes/filters/snorkels ad-nauseam over there. Most are snake-oil, performance-wise, but a few do actually help a little.

Then again, if it's just sound you're after, why not get a spare airbox lid (or two) and experiment:-
1) Drill a few holes...maybe cover up inside with wire/fabric mesh.
2) Cut the front half off, create a wire-mesh 'cage' and attach that (maybe again line with some fine fabric mesh).

TheKeyboardDemon

713 posts

208 months

Sunday 8th July 2007
quotequote all
I agree with what's already be said, don't try and do it cheap as you could risk having to spend a fortune putting a money saving mistake right.

Biggriff

2,312 posts

285 months

Monday 9th July 2007
quotequote all
Take the lid off the airbox which is a cheap and effective mod. Lots of S2K drivers do it. It's reckoned to cost 1-2bhp but the sound is great (apparently).

Richard


jonner

142 posts

207 months

Monday 9th July 2007
quotequote all
Just leave it alone sounds best...

Biggriff

2,312 posts

285 months

Monday 9th July 2007
quotequote all
We left ours alone on the induction side but fitted a full supersprint system and it sounds lovely (bit expensive though)

Bibbs

3,733 posts

211 months

Monday 9th July 2007
quotequote all
I've a spare airbox with the insides cut out. There is also a method to only open the front of the airbox.

I got bored of the induction sound (a saxo will sounds the same with a sock taped over the intake) with the whine when it was stationary.

Qube

437 posts

261 months

Monday 9th July 2007
quotequote all
MrFlibbles said:
It makes so much difference, it sounds like the devil!
I swapped my stock airbox for a K&N induction kit, east to fit and not overly expensive either around £185. If you liked the sound of the lid off then you will love the sound of an induction kit. K&N reckons you get an extra 5 - 7 bhp. I gotta say the car does feel, drive and sound better than with the stock airbox.

Buy one and you'll be looking for the nearest tunnel to drive thru time and time again !!

Jonesy CRX_Turbo

133 posts

203 months

Monday 9th July 2007
quotequote all
I've been told S2000 with an induction kit in the engine bay lose power due to heat soak as mentioned earlier. I wouldn't go for anything like a K&N on something as highly factory tuned as an S2000. As above i'd either go for the Js racing or Top fuel as they have a gorgeous carbon box and actually make power. (dyno proven not max power mag!!!)

Qube

437 posts

261 months

Tuesday 10th July 2007
quotequote all
Jonesy CRX_Turbo said:
I've been told S2000 with an induction kit in the engine bay lose power due to heat soak as mentioned earlier. I wouldn't go for anything like a K&N on something as highly factory tuned as an S2000. As above i'd either go for the Js racing or Top fuel as they have a gorgeous carbon box and actually make power. (dyno proven not max power mag!!!)
It's up to the individual owner msyelf. As I have owned a S2000 for the last two and half years that is my opinion, and I can say that with the induction kit the car does feel like it breaths better. You do get heatsoak though, but only in traffic. As for the increase in bhp the figures are clearly illustrated on the K&N website whether they are right or wrong, the induction kit has undergone dyno testing.

Max power to me is when I hit the 9000 rev limiter.

Jonesy CRX_Turbo

133 posts

203 months

Wednesday 11th July 2007
quotequote all
That wasn't aimed at anyone in a sh**ty way and I'm not saying the K&N doesn't have power figures to back it up. I'm simply saying the S2000 engine like all the top end Honda engines have undergone a lot of R&D and it's very hard to improve on it. That's why IN MY OPINION i wouldn't go anywhere near a filter that was in the engine bay.


Royden

37 posts

218 months

Friday 13th July 2007
quotequote all
I had a look at a few air filters, even got a quote from GruppeM for a bespoke kit, came out at £850 but its a hell of a beast, I'd post some pics but don't know how to!! In the end I have opted for a BMC for £260 (will be getting rid of my S2k in a couple of years, but only to get a newer one!). Better than the Piper Cross as it has a cotton filter and an enclosed carbon box (apparently) to keep it cool. Bit more than the K&N but I think it's worth it.

Jonesy CRX_Turbo

133 posts

203 months

Friday 13th July 2007
quotequote all
Mate at work has a BMC on his civic type r and it's an excellent set up. Comes with an enclosed filter and a pipe that you locate in the bumper feeding lovely cold air!! Let us know what you think when you've fitted it!

Royden

37 posts

218 months

Saturday 14th July 2007
quotequote all
Will do, I'm getting it fitted the same time as a Buddy Club exhaust, I know it's loud and I might have been better off getting a HKS or something like that, but it's 400 quid cheaper and from what I've seen / heard on other S2's it seems to do the job. Had to have it sent from Japan so will have them both fitted in a couple of weeks (early August) so will let you know. Does anyone know how to embed pics? Seems a shame not to be able to display the GruppeM that I can't afford!

MrFlibbles

Original Poster:

7,692 posts

284 months

Saturday 14th July 2007
quotequote all
You need to host the pic somewhere, (i use photobucket.com) which will then give you a link.

Then [img]whatever the link is[/img]

Job done.

Royden

37 posts

218 months

Saturday 14th July 2007
quotequote all
Can't get it to display correctly. Here is the link, appologies for the dodgy skiing pics!!

http://www.flickr.com/photos/74136962@N00/80846536...

For some reason it doesn't open the link directly, you need to copy and paste it. I aren't normally this bad with computers, honest.....

Edited by Royden on Saturday 14th July 14:03


Edited by Royden on Saturday 14th July 14:05

MrFlibbles

Original Poster:

7,692 posts

284 months

Saturday 14th July 2007
quotequote all
I think its becuase the flickr link has an "@" in it.

Nice pic, that Gruppe M set up looks like something from the planet borg...doesnt matter waht it looks like though i spose! thumbup

Jakdaw

291 posts

211 months

Saturday 14th July 2007
quotequote all

PJ S

10,842 posts

228 months

Saturday 14th July 2007
quotequote all


In order for an image to appear, it has to end in .jpeg/jpg or .gif
Anything else will be just a link, and with the @ in it, considered an email address.