Drive by noise limits

[QBee]

QBee said:

Go get it static tested before you book. Just find a circuit near you with a track day on, call them in advance to arrange, and then rock up just after the start, after everyone has been tested. They are keen to get you on track, so tend to want to help. It’s no big deal to them to get the meter out again. All MSV circuits seem to use the same type of meter.

Bedford do their tests in the middle of nowhere on the way into the circuit, but right by a couple of small buildings. I always struggled with their test, and it is worse if it’s a damp murky morning.

Sorry, should have used "quote" - my comment was aimed at the Honda driver in the post above bricking it about Bedford's noise test

[JB!]

QBee said:

QBee said:

Go get it static tested before you book. Just find a circuit near you with a track day on, call them in advance to arrange, and then rock up just after the start, after everyone has been tested. They are keen to get you on track, so tend to want to help. It’s no big deal to them to get the meter out again. All MSV circuits seem to use the same type of meter.

Bedford do their tests in the middle of nowhere on the way into the circuit, but right by a couple of small buildings. I always struggled with their test, and it is worse if it’s a damp murky morning.

Sorry, should have used "quote" - my comment was aimed at the Honda driver in the post above bricking it about Bedford's noise test

Left it too late!

Passed static, got warnings a couple of times, but not flagged, highest was 86.5db.

I suspect i can get away with taking the bung out and re-packing.