chevrolet astro ( starcraft conversion )

chevrolet astro ( starcraft conversion )

Author
Discussion

Mst007

472 posts

223 months

Monday 18th June 2007
quotequote all
Hi mate, try www.astrosafari.co.uk and www.astrosafari.com (the US version)
as a starting point!

cheers
Mark
(fellow dayvan owner)

BLUETHUNDER

7,881 posts

261 months

Monday 18th June 2007
quotequote all
anonymous said:
[redacted]
My brother has just bought the same.(pics to follow) As regards for info.Then as previously been mentioned above.thumbup

Electron

605 posts

220 months

Friday 24th April 2009
quotequote all
My Starcraft came from Japan. The telly had been disconnected.

I'm now trying to get the three power feeds behind the telly to power up.

The control panel tells me the TV/VCR is powered on but there is no power to any of the sockets.

Anyone know if there are any fuses for the three feeds ??

Alternatively anyone know a **really good** car electrician who could help troubleshoot.

I have a new DVD + TV + 12v amp ready to go in but no power !

Any other ideas welcome ....


Electron

605 posts

220 months

Sunday 26th April 2009
quotequote all

Thanks for advice .... I'll do the same and pull a new feed through ... if I get really stuck I may PM you and have a trip up North :-)

Electron

605 posts

220 months

Monday 4th May 2009
quotequote all
So I bit the bullet and pulled everything apart.

I removed the CD Autochanger from the top box. Removed all the wodden trim from the dash. Pulled the radio out and the bulkhead cover.

I ran a 27 amp fused feed from the battery in through the existing bulkhead cable hole to a switch. (I want to run the dvd/telly without the engine running and be able to isolate the whole lot).

I used the CD autochanger cable to pull through new fused power feed up into the top lockers to the existing power sockets.

I have a Centurion DVD player and a £10 2 x 200w amp off ebay into a new LCD telly. The new LCD tellies are so much lighter and draw a lot less current than the 10 year old "tube" it's a no brainer to replace ...

I used the LCD telly wallmount brutally hacksawed down mounted on a piece of MDF in the hole where the old telly sat so that the telly can be tilted down slightly ....

I also junked the old speakers and replaced them with new 6" 3 ways ...

The kids then promptly sat in the van all afternoon :-)


LeighW

4,414 posts

189 months

Wednesday 6th May 2009
quotequote all
I have the exact same job to do in my van. It had a jap tv up there when I bought it, which was disconnected, and there's no power up there at all, except for the feed to the multichanger.

I’ve re-trimmed the rear of my van to get rid of most of the horrible wood. I’ve now put in a 12v lcd tv/dvd which has it’s own built in rechargeable battery. To charge it, I currently have to plug it in to one of the 12v outlets in the rear or the dash, but I want to run it’s own permanent feed up there.

I also need to get rid of the jap stereo for a decent one with i-pod control. Was the stereo much grief to remove? Mine doesn’t look like it comes out of the front like normal car stereos, so I presume I’ve got to remove some of the dash?

Electron

605 posts

220 months

Friday 8th May 2009
quotequote all
Leigh,

It's actually pretty straight forward once you get going !

I swapped out the Japanese radio for a Pioneer with iPod connection. the only pain is the number of speakers in the van and the usual butchered connections.

I cut out all the butchered bits and ended up with the aerial, power, the block connector and ipod cable. Once you have it all near it all fits. (With the stringy mess the radio didn't fit the dash) I used a spacer as I needed the power feeds for the top boxes etc.

I'm down in Basingstoke so a bit further away for a "reference visit" but feel free to PM if you want ...

This is the LCD



And the DVD (the flash picks up the cables at the back !)



The radio in mine looks like ..



And the van :-)