Who/Where can free my pistons?

[Jonjo91]

Stripping a motorbike at the minute and the front brake pistons are having none of the hydraulic pressure the brake lever can offer.
Anyone or garage with air compressor/grease gun available to help?

Thanks,

[bimsb6]

If the brake m/c won't shft it an air line won't .

[Yeti Bo Bo]

put diesel in the bore and leave it over night if it seized then try again.

[daimatt]

where are you? I have a compressor and have stripped a few bike calipers recently so may be able to help. PM me in case I don't look back here for a bit

[Turn7]

what bike/calipers?

[Jonjo91]

Ninja 4 pot tokicos

[Turn7]

bimsb6 said:

If the brake m/c won't shft it an air line won't .

This is right.

If you cant pump them out then you will have resort to brute force and accept that new pistons and seals will be needed.

From Kawasaki this can work out quite expensive,but aftermarket are avialable.

[bimsb6]

Jonjo91 said:

Ninja 4 pot tokicos

They are known to rot quite badly

[Jonjo91]

All sorted with 125psi!