Do you set sail, when casting off a motor boat..?

Do you set sail, when casting off a motor boat..?

Author
Discussion

bridgdav

Original Poster:

4,805 posts

249 months

Sunday 26th October 2014
quotequote all
Seriously, is there a specific verb which describes the activity of powering a motor driven boat..?

Sailboats set sail
Cruises set sail
A Dingy will sail


It's a pub discussion question.!

Ayahuasca

27,427 posts

280 months

Sunday 26th October 2014
quotequote all
Motored?


Huntsman

8,067 posts

251 months

Sunday 26th October 2014
quotequote all
I've owned a motorboat for 13 years.

Set off.
Slip lines.
Drive off.
Let's go!
Get underway.

We don't use set sail.

I never say moor up, always say parking, I only do it to annoy pedants.

kowalski655

14,653 posts

144 months

Sunday 26th October 2014
quotequote all
Going " motor boating" is probably the wrong term,but sounds more fun

Simpo Two

85,504 posts

266 months

Sunday 26th October 2014
quotequote all
You have two things here. One is undoing the lines and setting off, the other is driving. I'd probably use 'get under way' and 'cruising'.

P924

1,272 posts

183 months

Sunday 26th October 2014
quotequote all
Huntsman said:
I've owned a motorboat for 13 years.

Set off.
Slip lines.
Drive off.
Let's go!
Get underway.

We don't use set sail.

I never say moor up, always say parking, I only do it to annoy pedants.
"Release the land!"

mickrick

3,700 posts

174 months

Sunday 26th October 2014
quotequote all
P924 said:
"Release the land!"
rofl Priceless!

the_lone_wolf

2,622 posts

187 months

Sunday 26th October 2014
quotequote all
bridgdav said:
Seriously, is there a specific verb which describes the activity of powering a motor driven boat..?
Any vessel is broadly speaking in one (or more) of three states1, here with rough definitions:

Made fast = Tied to something solid (moored or anchored)

Underway = Not tied to anything solid

Making way = Propelling herself through the water, be it by motor, sail or oar

A vessel can be underway and making way

There are important legal differences and consequences depending on what state a vessel is in

1-Yes, there's more, I know... wink

smile

Edited by the_lone_wolf on Sunday 26th October 21:04

Ritchie335is

1,861 posts

203 months

Sunday 26th October 2014
quotequote all
"Throw the ropes"

"Steam" or "Steaming"

That's my fishing, fking about lingo anyway.

ETA, I love "release the land"! I'm gonna use that.biggrin

Hard-Drive

4,089 posts

230 months

Monday 27th October 2014
quotequote all
"Getting in the way/making lots of noise/ignoring the colregs/creating lots of wash" can all be used to describe the actual act of operating a motorboat at sea.

"Undoing the string from the comically tiny Fisher-Price cleats" is the equivalent of slipping lines and "using both 200hp engines and a ludicrously noisy bowthruster an awful lot whilst shouting at the wife from the steering balcony" is the act if manoeuvring a 26' boat in a marina.

Hope this helps...



(Runs for cover...)

anonymous-user

55 months

Monday 27th October 2014
quotequote all
Cast off

Simpo Two

85,504 posts

266 months

Monday 27th October 2014
quotequote all
Hard-Drive said:
"using both 200hp engines and a ludicrously noisy bowthruster an awful lot whilst shouting at the wife from the steering balcony" is the act if manoeuvring a 26' boat in a marina.
One shouldn't need a bow-thruster AND a wife!

Marcellus

7,120 posts

220 months

Monday 27th October 2014
quotequote all
Simpo Two said:
Hard-Drive said:
"using both 200hp engines and a ludicrously noisy bowthruster an awful lot whilst shouting at the wife from the steering balcony" is the act if manoeuvring a 26' boat in a marina.
One shouldn't need a bow-thruster AND a wife!
You've not seen him sail.... He need all the help he can get....... Especially gybing round X yesterday

pad58

12,545 posts

182 months

Monday 27th October 2014
quotequote all
We cast off and steam.

MartG

20,689 posts

205 months

Monday 27th October 2014
quotequote all

Hard-Drive

4,089 posts

230 months

Monday 27th October 2014
quotequote all
Marcellus said:
Simpo Two said:
Hard-Drive said:
"using both 200hp engines and a ludicrously noisy bowthruster an awful lot whilst shouting at the wife from the steering balcony" is the act if manoeuvring a 26' boat in a marina.
One shouldn't need a bow-thruster AND a wife!
You've not seen him sail.... He need all the help he can get....... Especially gybing round X yesterday
Cheeky barsteward! Of course when one is coordinating two extra sails and another body, sailing a proper boat, compared to your sailing school kid's boat, there is a lot more to go wrong... hehe

I will hold my hands up and say it was a hopeless gybe and how the hell we stayed the right way up, I don't know! There was some video being shot yesterday...let's hope that one ends up on the cutting room floor!

Marcellus

7,120 posts

220 months

Monday 27th October 2014
quotequote all
Hard-Drive said:
Cheeky barsteward! Of course when one is coordinating two extra sails and another body, sailing a proper boat, compared to your sailing school kid's boat, there is a lot more to go wrong... hehe

I will hold my hands up and say it was a hopeless gybe and how the hell we stayed the right way up, I don't know! There was some video being shot yesterday...let's hope that one ends up on the cutting room floor!
lol....... Your interesting gybe certainly woke me up, came flyint round to be face with a bloody great furball almost on it's side in front of me.... Have you thought about a mast head float? idea you can usually borrow one from the bosuns.

I think Andy only went out to film your 2nd race

Hard-Drive

4,089 posts

230 months

Monday 27th October 2014
quotequote all
Marcellus said:
Hard-Drive said:
Cheeky barsteward! Of course when one is coordinating two extra sails and another body, sailing a proper boat, compared to your sailing school kid's boat, there is a lot more to go wrong... hehe

I will hold my hands up and say it was a hopeless gybe and how the hell we stayed the right way up, I don't know! There was some video being shot yesterday...let's hope that one ends up on the cutting room floor!
lol....... Your interesting gybe certainly woke me up, came flyint round to be face with a bloody great furball almost on it's side in front of me.... Have you thought about a mast head float? idea you can usually borrow one from the bosuns.

I think Andy only went out to film your 2nd race
Only filmed the second race? Oh well, he missed the morning race that we WON...easily...complete with dodgy gybe...oh well.

Marcellus

7,120 posts

220 months

Monday 27th October 2014
quotequote all
O/t video posted; http://youtu.be/aCdMPlOnueI

andy97

4,703 posts

223 months

Monday 27th October 2014
quotequote all
You "slip, and proceed".