supercharging sbc 383 Amerspeed ?
Discussion
F.C. said:
Just been looking at the Weineck engine mentioned, what a feat of engineering!
780Cu/12.9L. Bp shares, anyone?
1100bhp and 1300 ft.lbs or 1760Nm all shoehorned into a cobra.
Madness.
780Cu? is that all? try 1005Cu780Cu/12.9L. Bp shares, anyone?
1100bhp and 1300 ft.lbs or 1760Nm all shoehorned into a cobra.
Madness.
http://www.sonnysracingengines.com/engines/sar-100...
Chris.
V8Dom said:
if we want to be silly why not look at nelson race engines... turbo packages, 1500 hp upwards. and seen 2500hp motors on American Hotrod
Pfft check out Steve Morris' 3000++ BHP BBC engines in both supercharger and Trubo setups. In fact they are currently making an intake manifold for Red Victor 3! Mertens said:
I don't look for a quarter mile engine...
You have to get the power on the road and make a turn with it...
I don't see anything above 700hp as added value on track.
mmm im not sure about that.. im running upwards of 600 hp and feel there is lots of oppotunities for more hp on a track like silverstone...You have to get the power on the road and make a turn with it...
I don't see anything above 700hp as added value on track.
as speed increases so does rear down force so putting the power down not a problem, but yes 8540 hp on a gocart track i can imagine restrictive... a 1000 hp at silverstone i recon would be fab
Sorry merten's we were just messing about. Would NOT recommend a Steve Morris BBC Procharged motor for an Ultima. mainly because even if you could get the engine to fit in the engine bay you would have to cut a 24inch whole in the windshield for the supercharger inlet.
However they do make some interesting LS stuff. Including a drop in forged assembly that they have tested to over 1000bhop with stock heads and intake (with boost).
However they do make some interesting LS stuff. Including a drop in forged assembly that they have tested to over 1000bhop with stock heads and intake (with boost).
Gassing Station | Ultima | Top of Page | What's New | My Stuff