Website updates
Discussion
Oh yes and don't forget to put the Ally shields behind the rear number plate lights, I didn't know they existed before it went for the free factory checks.
Nealy there mate, better start to think about booking the SVA, the waiting list is somtimes upto 4 Weeks.
>> Edited by GTRCLIVE on Thursday 27th February 11:39
Nealy there mate, better start to think about booking the SVA, the waiting list is somtimes upto 4 Weeks.
>> Edited by GTRCLIVE on Thursday 27th February 11:39
Bonded them on with fibreglass, the factory can provide the alloy brackets.
Don't forgett the edging on the wing mirror glass and that none of the braided hoses should be touching any wiring anywere. I used spiral wrap on the braided hoses at any point where they were in close proximity.
Good luck.
Don't forgett the edging on the wing mirror glass and that none of the braided hoses should be touching any wiring anywere. I used spiral wrap on the braided hoses at any point where they were in close proximity.
Good luck.
ultimaandy said: Bonded them on with fibreglass, the factory can provide the alloy brackets.
Don't forgett the edging on the wing mirror glass and that none of the braided hoses should be touching any wiring anywere. I used spiral wrap on the braided hoses at any point where they were in close proximity.
Good luck.
Already got the ally boxes.
Wing mirror edging? Wassat then?
Braided hoses all fine as all my wiring runs through convoluted tubing.
Covulated Tubing eh... I must say that I wrapped all the wiring on the car in spiralwrap to give it that added protection.
I'm glad I'm not the only compulsive builder!
The glass in the mirror will fail as its to sharp, it's edges will need covering for SVA.
I used some rubberised edging and glued it to the mirror at the back and cut it down on the front to a about 5mm.
I'm glad I'm not the only compulsive builder!
The glass in the mirror will fail as its to sharp, it's edges will need covering for SVA.
I used some rubberised edging and glued it to the mirror at the back and cut it down on the front to a about 5mm.
stig said:
GTRCLIVE said: By the way it looked better in yellow !!!
Everyone knows that Blue is the new Black!
Yellow is the new Hearing Aid Beige
In my opinion..the Ultima looks best in metallic blue, with red as the close second.
Here's my opinion in what the Ultima looks best in
1. Blue
2. Red
3. Silver
4. Black
5. Yellow
6. Orange
7. White
GTRCLIVE said: No sorry if you going to stand out from the Crowd, (i.e. buy an Ultima ) then it's got to be yellow, everything else just looks.... well dull. Sorry..
This may sound kind of odd, but even though I am getting an Ultima, I am a somewhat subtle character. I like to try to blend in a little. While all the colors look good on an Ultima and will get attention no matter what, yellow will punch onlookers in the face in an attempt to say, "LOOK AT ME D***IT!!"
ULTIMALOVER said:
GTRCLIVE said: No sorry if you going to stand out from the Crowd, (i.e. buy an Ultima ) then it's got to be yellow, everything else just looks.... well dull. Sorry..
This may sound kind of odd, but even though I am getting an Ultima, I am a somewhat subtle character. I like to try to blend in a little. While all the colors look good on an Ultima and will get attention no matter what, yellow will punch onlookers in the face in an attempt to say, "LOOK AT ME D***IT!!"
Some crave attention (perhaps they're lacking in other areas?
) and some don't. The defence rests
Gassing Station | Ultima | Top of Page | What's New | My Stuff