Freeview retune on Sept 30th
Discussion
telecat said:
HUMAX Users Tip. I have updated two 9200T's and a 9150T so this should also apply to the 9350T
1 You will lose any Scheduled recordings on those channels that are moving so Make a note of them.
2 Before using the Auto tuning feature delete channel 5, ITV3,ITV4 and channels between 30 and 45 using the Edit Channel list feature. This will put the New channels in the correct slots on the EPG. Again if you have any scheduled recordings on those channels you will need to re-input them.
3 ITV2+1 re-appeared on my boxes as ITV but further down the EPG. IT IS ITV2+1 but they seem to have mislabelled it.
4 If your channels are in a funny order then using the Edit channel feature delete the channels that are "out of order" and do another Auto tune.
5 If you still have any "800" channels then you will find they have "placeholders" stating that you need to re-tune. These are the "Old" Channel 5 etc channels and will be removed in due course.
If I come across any other "funny's" I'll post them.
None of that should be required (except item 1) if you just reset to factory default, which automatically erases all the old channel settings and runs the Installation Wizard.1 You will lose any Scheduled recordings on those channels that are moving so Make a note of them.
2 Before using the Auto tuning feature delete channel 5, ITV3,ITV4 and channels between 30 and 45 using the Edit Channel list feature. This will put the New channels in the correct slots on the EPG. Again if you have any scheduled recordings on those channels you will need to re-input them.
3 ITV2+1 re-appeared on my boxes as ITV but further down the EPG. IT IS ITV2+1 but they seem to have mislabelled it.
4 If your channels are in a funny order then using the Edit channel feature delete the channels that are "out of order" and do another Auto tune.
5 If you still have any "800" channels then you will find they have "placeholders" stating that you need to re-tune. These are the "Old" Channel 5 etc channels and will be removed in due course.
If I come across any other "funny's" I'll post them.
B16 RFF said:
telecat said:
HUMAX Users Tip. I have updated two 9200T's and a 9150T so this should also apply to the 9350T
1 You will lose any Scheduled recordings on those channels that are moving so Make a note of them.
2 Before using the Auto tuning feature delete channel 5, ITV3,ITV4 and channels between 30 and 45 using the Edit Channel list feature. This will put the New channels in the correct slots on the EPG. Again if you have any scheduled recordings on those channels you will need to re-input them.
3 ITV2+1 re-appeared on my boxes as ITV but further down the EPG. IT IS ITV2+1 but they seem to have mislabelled it.
4 If your channels are in a funny order then using the Edit channel feature delete the channels that are "out of order" and do another Auto tune.
5 If you still have any "800" channels then you will find they have "placeholders" stating that you need to re-tune. These are the "Old" Channel 5 etc channels and will be removed in due course.
If I come across any other "funny's" I'll post them.
None of that should be required (except item 1) if you just reset to factory default, which automatically erases all the old channel settings and runs the Installation Wizard.1 You will lose any Scheduled recordings on those channels that are moving so Make a note of them.
2 Before using the Auto tuning feature delete channel 5, ITV3,ITV4 and channels between 30 and 45 using the Edit Channel list feature. This will put the New channels in the correct slots on the EPG. Again if you have any scheduled recordings on those channels you will need to re-input them.
3 ITV2+1 re-appeared on my boxes as ITV but further down the EPG. IT IS ITV2+1 but they seem to have mislabelled it.
4 If your channels are in a funny order then using the Edit channel feature delete the channels that are "out of order" and do another Auto tune.
5 If you still have any "800" channels then you will find they have "placeholders" stating that you need to re-tune. These are the "Old" Channel 5 etc channels and will be removed in due course.
If I come across any other "funny's" I'll post them.
telecat said:
B16 RFF said:
telecat said:
HUMAX Users Tip. I have updated two 9200T's and a 9150T so this should also apply to the 9350T
1 You will lose any Scheduled recordings on those channels that are moving so Make a note of them.
2 Before using the Auto tuning feature delete channel 5, ITV3,ITV4 and channels between 30 and 45 using the Edit Channel list feature. This will put the New channels in the correct slots on the EPG. Again if you have any scheduled recordings on those channels you will need to re-input them.
3 ITV2+1 re-appeared on my boxes as ITV but further down the EPG. IT IS ITV2+1 but they seem to have mislabelled it.
4 If your channels are in a funny order then using the Edit channel feature delete the channels that are "out of order" and do another Auto tune.
5 If you still have any "800" channels then you will find they have "placeholders" stating that you need to re-tune. These are the "Old" Channel 5 etc channels and will be removed in due course.
If I come across any other "funny's" I'll post them.
None of that should be required (except item 1) if you just reset to factory default, which automatically erases all the old channel settings and runs the Installation Wizard.1 You will lose any Scheduled recordings on those channels that are moving so Make a note of them.
2 Before using the Auto tuning feature delete channel 5, ITV3,ITV4 and channels between 30 and 45 using the Edit Channel list feature. This will put the New channels in the correct slots on the EPG. Again if you have any scheduled recordings on those channels you will need to re-input them.
3 ITV2+1 re-appeared on my boxes as ITV but further down the EPG. IT IS ITV2+1 but they seem to have mislabelled it.
4 If your channels are in a funny order then using the Edit channel feature delete the channels that are "out of order" and do another Auto tune.
5 If you still have any "800" channels then you will find they have "placeholders" stating that you need to re-tune. These are the "Old" Channel 5 etc channels and will be removed in due course.
If I come across any other "funny's" I'll post them.
Edited by B16 RFF on Thursday 1st October 17:27
B16 RFF said:
telecat said:
B16 RFF said:
telecat said:
HUMAX Users Tip. I have updated two 9200T's and a 9150T so this should also apply to the 9350T
1 You will lose any Scheduled recordings on those channels that are moving so Make a note of them.
2 Before using the Auto tuning feature delete channel 5, ITV3,ITV4 and channels between 30 and 45 using the Edit Channel list feature. This will put the New channels in the correct slots on the EPG. Again if you have any scheduled recordings on those channels you will need to re-input them.
3 ITV2+1 re-appeared on my boxes as ITV but further down the EPG. IT IS ITV2+1 but they seem to have mislabelled it.
4 If your channels are in a funny order then using the Edit channel feature delete the channels that are "out of order" and do another Auto tune.
5 If you still have any "800" channels then you will find they have "placeholders" stating that you need to re-tune. These are the "Old" Channel 5 etc channels and will be removed in due course.
If I come across any other "funny's" I'll post them.
None of that should be required (except item 1) if you just reset to factory default, which automatically erases all the old channel settings and runs the Installation Wizard.1 You will lose any Scheduled recordings on those channels that are moving so Make a note of them.
2 Before using the Auto tuning feature delete channel 5, ITV3,ITV4 and channels between 30 and 45 using the Edit Channel list feature. This will put the New channels in the correct slots on the EPG. Again if you have any scheduled recordings on those channels you will need to re-input them.
3 ITV2+1 re-appeared on my boxes as ITV but further down the EPG. IT IS ITV2+1 but they seem to have mislabelled it.
4 If your channels are in a funny order then using the Edit channel feature delete the channels that are "out of order" and do another Auto tune.
5 If you still have any "800" channels then you will find they have "placeholders" stating that you need to re-tune. These are the "Old" Channel 5 etc channels and will be removed in due course.
If I come across any other "funny's" I'll post them.
Edited by B16 RFF on Thursday 1st October 17:27
Randy Winkman said:
I can no longer get ITV4 or Channel 5! When I go to Channel 5 it just says "Channel 5 has moved - you need to re-tune your box". That's what I just did!
When you retune make sure you do not pick the 'Add new channels' option, you need to do a full retune, somethimes its called default settings or system reset or something similar, if you still cant do it then post up the make and model of your box.E31Shrew said:
How many customers will call saying they cant see the Free HD? Little seems to have been said about the need to buy an HD box to go with it.
And the HD telly to go with it. I found it annoying when a couple of years they were sprouting all this about the digital change over, BUT didnt then mention digi box's, its only recent the ad on telly mentions the digi box's.Did the early ads result in some changing to eithere sky or some other system thinking their cherished tellys would't work?
Gassing Station | Home Cinema & Hi-Fi | Top of Page | What's New | My Stuff