Connecting shower drain to waste pipe.
Discussion
I have a Wedi Fundo Plano shower tray to fit to existing solvent welded 40mm waste pipe run. Will I be able to solvent weld to the outlet pipe that is built in to the tray or do I have to use push fit/compression?
The joint will be covered with mortar as per the instructions with the tray.
The tray and outlet pipe look like this...
The joint will be covered with mortar as per the instructions with the tray.
The tray and outlet pipe look like this...
Depends on the material of the waste/trap.
If it's not ABS use one of these to get onto solvent weld,
http://www.screwfix.com/p/universal-compression-wa...
If it's not ABS use one of these to get onto solvent weld,
http://www.screwfix.com/p/universal-compression-wa...
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff