Tools you wish you'd bought sooner...

Tools you wish you'd bought sooner...

Author
Discussion

dickymint

24,385 posts

259 months

Wednesday 17th April 2019
quotequote all
illmonkey said:
Probably a bit basic for some of you. We had a sparky on site and he said the best tool he had was this
:


It's just a cable cutter, but I got one and it's above any other I've had. And if you've bored, the handle does a 360, so you can practice your gun spin. hehe
No good for cutting wild garlic though rofl

dickymint

24,385 posts

259 months

Wednesday 17th April 2019
quotequote all
Watchman said:
YES..!! Ordered from Powertoolmate.co.uk

Thanks for the tip. That's exactly what I was after.
Enjoy. I love it when my mates take a step back whenever it's deployed hehe

illmonkey

18,211 posts

199 months

Wednesday 17th April 2019
quotequote all
dickymint said:
illmonkey said:
Probably a bit basic for some of you. We had a sparky on site and he said the best tool he had was this
:


It's just a cable cutter, but I got one and it's above any other I've had. And if you've bored, the handle does a 360, so you can practice your gun spin. hehe
No good for cutting wild garlic though rofl
Get back in the kitchen!

dickymint

24,385 posts

259 months

Wednesday 17th April 2019
quotequote all
illmonkey said:
dickymint said:
illmonkey said:
Probably a bit basic for some of you. We had a sparky on site and he said the best tool he had was this
:


It's just a cable cutter, but I got one and it's above any other I've had. And if you've bored, the handle does a 360, so you can practice your gun spin. hehe
No good for cutting wild garlic though rofl
Get back in the kitchen!
Off to shop for spring onions and cream first wink

CoolHands

18,691 posts

196 months

Wednesday 17th April 2019
quotequote all
Getting away from house diy for a moment, I bought some knipex spring hose clamp pliers. £53 but worth it. They really make getting the coolant hose clamps off possible (I had to replace thermostat and water pump pipe on a mini). Modern hose clamps are so tight and hard to get off. These are lovely to use.









Edited by CoolHands on Wednesday 17th April 18:59

B17NNS

18,506 posts

248 months

Wednesday 17th April 2019
quotequote all
Watchman said:
Can't get my head around the radios for either. The tech is hardly groundbreaking yet they're £200.
I've got the ToughSystem radio. Does sound good and has cracking bass. Doubles as a charger too. But as you say, expensive and not really essential.

V8mate said:
What's the consensus on Milwaukee tools? I'd never heard of them until a year ago, and now they're everywhere.
It's good kit.

CoolHands said:
I bought some knipex spring hose clamp pliers. £53 but worth it.
Knipex are the king of pliers. Their VDE stuff is lovely.

ecotec

404 posts

130 months

Wednesday 17th April 2019
quotequote all
HairyMaclary said:
My Makita 18v Impact Driver.

Oh and my Matika work light, combi drill, hedge trimmer, sander... Great that the battery works on all the Makita stuff.

I need a site radio next smile



you need the coffee maker!


https://www.makitauk.com/product/dcm501z.html

Bill

52,830 posts

256 months

Wednesday 17th April 2019
quotequote all
ecotec said:
Bugger me, this thread is dangerous.

My nomination for this thread is the 36v leaf blower, not least because it started me down the LXT route...

Gompo

4,415 posts

259 months

Wednesday 17th April 2019
quotequote all
dickymint said:
Wait!! before you splash your cash take a look at my weapon of choice - love the way you just flick it open..............

https://www.youtube.com/watch?v=p9bf5WxVnBE

Had mine over two years and love it. This is the new version with a 45* lock so i'm buying another hehe
Tempted myself, does it fold back down with one hand too? I've had folding 'Stanley' knives before and find it a bit of a pain when I have to use both hands to put it away..

dickymint

24,385 posts

259 months

Wednesday 17th April 2019
quotequote all
Gompo said:
dickymint said:
Wait!! before you splash your cash take a look at my weapon of choice - love the way you just flick it open..............

https://www.youtube.com/watch?v=p9bf5WxVnBE

Had mine over two years and love it. This is the new version with a 45* lock so i'm buying another hehe
Tempted myself, does it fold back down with one hand too? I've had folding 'Stanley' knives before and find it a bit of a pain when I have to use both hands to put it away..
Oh yes but keep your pinkies out of the way yikes

FlipFlopGriff

7,144 posts

248 months

Wednesday 17th April 2019
quotequote all
Silky saw. Great for pruning trees/bushes. Extremely sharp and cuts both ways. Ideal if you're working at height and don't want to risk death by chain saw. Got 2 now - an 18cm and 30cm one.
FFG

Russ_H

359 posts

223 months

Wednesday 17th April 2019
quotequote all
ecotec said:
How have I managed for so long without this??

Bill

52,830 posts

256 months

Wednesday 17th April 2019
quotequote all
FlipFlopGriff said:
Silky saw. Great for pruning trees/bushes. Extremely sharp and cuts both ways. Ideal if you're working at height and don't want to risk death by chain saw. Got 2 now - an 18cm and 30cm one.
FFG
I'm lazier than you! https://www.amazon.co.uk/Makita-DJR186Z-Reciprocat...

richelli

285 posts

173 months

Wednesday 17th April 2019
quotequote all
These wide jaw extra thin bacho adjustable spanner’s. Wouldn’t be without them now.


guindilias

5,245 posts

121 months

Wednesday 17th April 2019
quotequote all
Bill said:
I have one of those as well and they are brilliant - I've even cut up a car body shell with one!

dmsims

6,539 posts

268 months

Wednesday 17th April 2019
quotequote all
FlipFlopGriff said:
Silky saw. cuts both ways.
FFG
You have a unique saw

guindilias

5,245 posts

121 months

Wednesday 17th April 2019
quotequote all
ecotec said:
If I was a coffee drinker I'd probably have one of those as well - confirmed Makita LXT nut, it's like an addiction!

smack

9,729 posts

192 months

Wednesday 17th April 2019
quotequote all
My dad is a long time Makita fanboy, and giving me some of his older 18V tools (The old 'my local tool shop has a newer tool I already have, but they sold to me at half price as the box was damaged' excuse - yeah, sure......). So I have ordered some 5A batteries and a charger on a good deal so I can use them, have some high amp batteries for future purchases. I'll pick up smaller battery or two no doubt.

I can see these free power tools are actually cost me a lot of money... hehe

ben5575

6,293 posts

222 months

Thursday 18th April 2019
quotequote all
smack said:
My dad is a long time Makita fanboy, and giving me some of his older 18V tools (The old 'my local tool shop has a newer tool I already have, but they sold to me at half price as the box was damaged' excuse - yeah, sure......). So I have ordered some 5A batteries and a charger on a good deal so I can use them, have some high amp batteries for future purchases. I'll pick up smaller battery or two no doubt.

I can see these free power tools are actually cost me a lot of money... hehe
ears

paulrockliffe

15,718 posts

228 months

Thursday 18th April 2019
quotequote all
smack said:
My dad is a long time Makita fanboy, and giving me some of his older 18V tools (The old 'my local tool shop has a newer tool I already have, but they sold to me at half price as the box was damaged' excuse - yeah, sure......). So I have ordered some 5A batteries and a charger on a good deal so I can use them, have some high amp batteries for future purchases. I'll pick up smaller battery or two no doubt.

I can see these free power tools are actually cost me a lot of money... hehe
I reckon for most DIY stuff you're better with more smaller batteries - They're lighter. I have same 4s I picked up on Gumtree that are great, but if I was buying new I'd go smaller, I rarely run flat mid-job and when ever I have they charge faster than you can use them in most jobs, so it's no big deal so long as you have spares. Plus if you have more tools you can use more of them at the same time without swapping batteries.

Sounds a bit daft, but if you're screwing wood together it's much quicker if you have two drills and a driver so you're not messing about swapping drill bits - pilot, countersink, screwdriver. Once you start cutting the wood as well you're into 4 batteries.