Discussion
Alucidnation said:
Our decorator used the bare plaster paint on a rental of ours after it was refurbished, and while having brilliant opacity, it did not stick all that well to bare plaster.
He said they would go back to misting.
Interesting. I found it stuck fine, but I did a first coat with about a 20% water dilution so maybe that helped. He said they would go back to misting.
bernhund said:
Surely nothing can be better, cheaper or easier than a mist coat of paint? I use SBR for sealing before tiling but if there are any areas where I've overlapped into a painted area, the paint slides around on it and is a pain in the arse.
Bare plaster paint is thicker so easier to apply without making a mess and covers the plaster better as it's more opaque.Cheaper, not that much in it.
Flibble said:
Alucidnation said:
Our decorator used the bare plaster paint on a rental of ours after it was refurbished, and while having brilliant opacity, it did not stick all that well to bare plaster.
He said they would go back to misting.
Interesting. I found it stuck fine, but I did a first coat with about a 20% water dilution so maybe that helped. He said they would go back to misting.
Maybe I’ll get them to try a little thinning next time.
Having said that, it is astonishing how well it covers!
Flibble said:
Bare plaster paint is thicker so easier to apply without making a mess and covers the plaster better as it's more opaque.
Which is great for a tradie im sure, but if it doesnt stick they your still buggered 6months down the line or next time you come to repaint!I did one mist coat and a top coat, 10l boggo brill white, but Dulux rather than any unbranded/crown milk and it covered fine.
Looked better 2 years later when I did a second top coat to spruce it up to sell, but even then three coats doesnt take that long.
Obviously the mist coat and ceiling dont need cutting in, and you often need two coats of a colour even over white anyway.
Daniel
Pondered over this for a while - I think we all know that painting onto “wet” plaster is a no no. So how “dry” should it be? And why don’t paint manufacturers state it on the tins? (Maybe they do?).
Turns out that above 12% moisture content plaster shouldn’t be painted unless sealed.
Ps. never seen a painter use a moisture meter!!
Turns out that above 12% moisture content plaster shouldn’t be painted unless sealed.
Ps. never seen a painter use a moisture meter!!
Edited by dickymint on Monday 17th December 19:23
dhutch said:
dickymint said:
Pondered over this for a while - I think we all know that painting onto “wet” plaster is a no no. So how “dry” should it be? And why don’t paint manufacturers state it on the tins? (Maybe they do?)
Wait till in changes colour nd doesn't feel cold and wet!Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff