Chipped column radiator - touching it up to invisible finish
Discussion
Hi All
Please see photo
Does anyone know the best way to touch up this column rad. I am going to contact Myson for their touch up paint but I was wondering how to get the best finish and whether I would need to prime it.
The paint has been chipped off by heavy object down to the metal. I am wondering whether to build up the paint in layers with a small paint brush. I expect they are sprayed in the factory
I find piston heads brilliant for tips so would be grateful for any advice
Cheers
24/7
Please see photo
Does anyone know the best way to touch up this column rad. I am going to contact Myson for their touch up paint but I was wondering how to get the best finish and whether I would need to prime it.
The paint has been chipped off by heavy object down to the metal. I am wondering whether to build up the paint in layers with a small paint brush. I expect they are sprayed in the factory
I find piston heads brilliant for tips so would be grateful for any advice
Cheers
24/7
Twentyfour7 said:
Thanks guy's, hadn't thought of either of those options!
Re DIY and finding a paint that to spray, unsure will get a colour match... I think unlikely manufacturer will supply the original rad colour in a spray
But the manufacturer will know the RAL number of the paint they use. With that knowledge you can have an aerosol made to match.Re DIY and finding a paint that to spray, unsure will get a colour match... I think unlikely manufacturer will supply the original rad colour in a spray
I wouldn't be spraying it, nor likely getting it re-enamelled.
Pick anything near about the right colour, in a suitable enamel paint (humbrol even!) and just touch it in with a brush and it should just disappear. Worse case you end up with some fine wet and dry to sand it back and polish with a bit of metal cleaner.
I'm a perfectionist and I am sure you could paint it in to match. Keep the repair as small as possible.
Daniel
Pick anything near about the right colour, in a suitable enamel paint (humbrol even!) and just touch it in with a brush and it should just disappear. Worse case you end up with some fine wet and dry to sand it back and polish with a bit of metal cleaner.
I'm a perfectionist and I am sure you could paint it in to match. Keep the repair as small as possible.
Daniel
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff