Discussion
5678 said:
Good shout, will try that.
Any links for the 4ml conversion?
Looks to be £29 here:Any links for the 4ml conversion?
https://www.evolutionvaping.co.uk/trillium-sub-tan...
Stu T said:
Even better! Still no joy in finding the 4ml conversion anywhere though.5678 said:
Stu T said:
Even better! Still no joy in finding the 4ml conversion anywhere though.I'm a huge Eden Mods fan and have had impeccable customer service from the owners Lee and Andy - I bought a Snapdragon v1.5 dripper second hand and it came without one of the spare 510 pins, contacted the guys and they sent me two out free of charge! Plus they make all their products in the UK. £28.75 is a bargain considering how well designed and machined their products are, and the Trillium accepts something like 28+ different coil heads so you can really tailor the vape to suit you; it's obviously designed as a direct to lung tank but you can buy certain Aspire coils that are suited to mouth to lung vaping, just change the drip tip out for a narrower one to suit you.
A review from the wonderful Mr Morter https://www.youtube.com/watch?v=BVXkVWdGf6Y
stevoknevo said:
The 4-5ml extension is a bodge using an Aspire Atlantis evo extension tube and a smok 22 pen glass or a Smok baby beast glass - doing this reduces the flavour. TBH the Trillium has a super easy top fill which makes it very easy to just top up on the go, takes literally seconds to fill, and you get the intended flavour.
This!!MagnusFrater said:
stevoknevo said:
The 4-5ml extension is a bodge using an Aspire Atlantis evo extension tube and a smok 22 pen glass or a Smok baby beast glass - doing this reduces the flavour. TBH the Trillium has a super easy top fill which makes it very easy to just top up on the go, takes literally seconds to fill, and you get the intended flavour.
This!!stevoknevo said:
Got an email contact for Smut (Daniel) for his contraband coils - cntrbndcoils@gmail.com
Drop him a line if you are looking for top notch coils made from the highest grade wire available.
Exchanged a few emails with Daniel yesterday, decided on what's best, placed an order at lunchtime and they arrived today, cracking service.Drop him a line if you are looking for top notch coils made from the highest grade wire available.
Stu T said:
stevoknevo said:
Got an email contact for Smut (Daniel) for his contraband coils - cntrbndcoils@gmail.com
Drop him a line if you are looking for top notch coils made from the highest grade wire available.
Exchanged a few emails with Daniel yesterday, decided on what's best, placed an order at lunchtime and they arrived today, cracking service.Drop him a line if you are looking for top notch coils made from the highest grade wire available.
Harry H said:
My full sized nautilus has started to give up the ghost. The thread is failing so it leaks.
Have been perfectly happy with it for the last couple of years and can't be bothered with all this sub ohm stuff.
So whats the current census on a replacement. Can I even still by something with decent capacity that will last me comfortably all day without having to top up etc ?
You can get a replacement Metal, Glass Lined Tank that includes the thread that the Coil screws into.Have been perfectly happy with it for the last couple of years and can't be bothered with all this sub ohm stuff.
So whats the current census on a replacement. Can I even still by something with decent capacity that will last me comfortably all day without having to top up etc ?
All you need is your Base, Coil and Tip.
https://www.amazon.co.uk/Replacement-Stainless-Tub...
I use a Mini Nautilus and broke the Glass within a Week or two. Replaced with the Metal Tank.
Stu T said:
stevoknevo said:
Excellent and he's a good lad, what did you go for?
I went for fused claptons and aliens, 0.4ohm. Not tried them yet but they look good.I bought a series mech mod yesterday and have a set of Daniel's fused claptons coming in at 0.4 for the pair that I'm going to use with the new mod - should be around 175w on fresh batteries, eek!
Same as this but in really poor condition that I'm going to renovate https://www.youtube.com/watch?v=WCZmhIac1mk
FocusRS3 said:
I’m sure been discussed on here already but what’s this talk about ‘popcorn lung’ being related to vaping about and are there any real tests been carried out yet ?
Have kicked cigs again since Xmas and loving my vape
Popcorn lung was named because there are high amounts of diacetyl used as a butter flavouring in popcorn. One guy in america ate pretty much only microwave popcorn all day every day and he inhaled a lot of this butter flavouring chemical over the years and it burned holes in his lungsHave kicked cigs again since Xmas and loving my vape
There were a few flavours that had this diacetyl flavouring in them and people panicked that the same could happen vaping it (the tabloids absolutely went nuts with it!!) but the quantities were far far lower and no harm was ever proved to be caused by vaping it.
Flavour manufacturers have now stopped using diacetyl flavours in their juices for the most part although you can still buy individual cappella flavourings if you're DIYing (Generally, if there's a V1 and a V2 flavouring, the V1 has diacetyl)
J8 SVG said:
Popcorn lung was named because there are high amounts of diacetyl used as a butter flavouring in popcorn. One guy in america ate pretty much only microwave popcorn all day every day and he inhaled a lot of this butter flavouring chemical over the years and it burned holes in his lungs
There were a few flavours that had this diacetyl flavouring in them and people panicked that the same could happen vaping it (the tabloids absolutely went nuts with it!!) but the quantities were far far lower and no harm was ever proved to be caused by vaping it.
Flavour manufacturers have now stopped using diacetyl flavours in their juices for the most part although you can still buy individual cappella flavourings if you're DIYing (Generally, if there's a V1 and a V2 flavouring, the V1 has diacetyl)
Many tks for this . There were a few flavours that had this diacetyl flavouring in them and people panicked that the same could happen vaping it (the tabloids absolutely went nuts with it!!) but the quantities were far far lower and no harm was ever proved to be caused by vaping it.
Flavour manufacturers have now stopped using diacetyl flavours in their juices for the most part although you can still buy individual cappella flavourings if you're DIYing (Generally, if there's a V1 and a V2 flavouring, the V1 has diacetyl)
I use Black reloaded Zeus juice 75-25 so assuming this ok ?
Zeus Juices are complex mixes of flavours with excellent individual flavour separation producing a vaping experience like no other, these juices are sure to send ... Ingredients Vegetable Glycerine Propylene Glycol Natural & Artificial Flavourings Nicotine (Unless Zero Nicotine). Cautions For electronic cigarette use only.
Death by Bunny – Oxford Vapours
Edited by FocusRS3 on Wednesday 24th January 08:36
stevoknevo said:
Thought I had lost a set up in the pub months ago, only for Mrs S to find it down the back of my bedside table It had two brand new batteries in too which I was most pissed at losing but I'm delighted to have it back as it's a cracking wee set up
Is that the prime Steve?I ordered some brochrome last week, got it in the hadlay now. It’s amazing! Nothing mad just a simple 5 wraps 3mm @0.4ohms. Tried a parallel build BT came in a bit too low for me around 0.14 and way too rowdy. Bought a ni80 coiloligy pack (the white box with loads of different coils) going to try a staged fused Clapton/brochrome later to see how that is.
Also picked up a USAohms ohm reader. Reads a bit lower than my dna40 though, 0.14 vs 0.17 not sure which is more accurate out of the two, guessing the ohm reader?
This brichromes awesome though, no ramp up time and tons of Flavour/vapor. Going to stick a quick build in the K5 today
griffin dai said:
Is that the prime Steve?
I ordered some brochrome last week, got it in the hadlay now. It’s amazing! Nothing mad just a simple 5 wraps 3mm @0.4ohms. Tried a parallel build BT came in a bit too low for me around 0.14 and way too rowdy. Bought a ni80 coiloligy pack (the white box with loads of different coils) going to try a staged fused Clapton/brochrome later to see how that is.
Also picked up a USAohms ohm reader. Reads a bit lower than my dna40 though, 0.14 vs 0.17 not sure which is more accurate out of the two, guessing the ohm reader?
This brichromes awesome though, no ramp up time and tons of Flavour/vapor. Going to stick a quick build in the K5 today
It's a SXK K5 mini on an Evic primo 2.0 - Svoemesto never made a K5 mini but SXK did, just a pity they had to put logos on it instead of making it plain. Hey ho.I ordered some brochrome last week, got it in the hadlay now. It’s amazing! Nothing mad just a simple 5 wraps 3mm @0.4ohms. Tried a parallel build BT came in a bit too low for me around 0.14 and way too rowdy. Bought a ni80 coiloligy pack (the white box with loads of different coils) going to try a staged fused Clapton/brochrome later to see how that is.
Also picked up a USAohms ohm reader. Reads a bit lower than my dna40 though, 0.14 vs 0.17 not sure which is more accurate out of the two, guessing the ohm reader?
This brichromes awesome though, no ramp up time and tons of Flavour/vapor. Going to stick a quick build in the K5 today
My apologies D, I did send you some brochrome in the post but due to the snow up here parcels have been taking longer to get to their destination; posted a parcel same day as sent you wire and the chap only received it today, a week later.
Got a few nice bits and bobs coming this week, an MCM Underground series box, a DotMod Petri v2 RDA, and an 18500/18350 GP Paps V3 tube mech. Also got a set of Aliens for my Kennedy 24mm from Smut, feck me they are rowdy! Going to be even rowdier when I put them on the Series box (0.38 dual coil =180w!)
Personally I'd go with the Ohms reader, least you'll know you won't be building something that's actually lower than it is, although 0.03 difference is nothing unless you plan on going below 0.15 when accuracy becomes rather important!
Vape Mail
Dead Rabbit SQ
Digiflavor DROP
Both look pretty good on the pulse murdered out
Flavours outstanding on the DR, just a simple 5 wrap brochrome coming out at 0.5ohms. Airflow wide open and it’s so smooth, tried in MTL mode but it’s too restrictive for me (and I prefer a tight draw!)
The Drop is just insane!!!!! Any dead rabbit fans need to get one, nice upgrade to the DR, got a pair of coiloligy Tri core fused Clapton’s in here @ 0.15ohms. It’s a beast!!!!! Super smooth and chucks the clouds!!!
Dead Rabbit SQ
Digiflavor DROP
Both look pretty good on the pulse murdered out
Flavours outstanding on the DR, just a simple 5 wrap brochrome coming out at 0.5ohms. Airflow wide open and it’s so smooth, tried in MTL mode but it’s too restrictive for me (and I prefer a tight draw!)
The Drop is just insane!!!!! Any dead rabbit fans need to get one, nice upgrade to the DR, got a pair of coiloligy Tri core fused Clapton’s in here @ 0.15ohms. It’s a beast!!!!! Super smooth and chucks the clouds!!!
My vapemail today was this MCM Underground series mod, I'm running a set of aliens at 0.38 which is equivalent to 185w on fresh batteries, it's a rowdy wee bugger! Complete animal!
I also got a DotMod Petri v2 RDA, cracking wee RDA but not any better than what I already have so it's back up for sale all ready
I also got a half litre of VG nicotine from a group buy, good wee day for deliveries
I also got a DotMod Petri v2 RDA, cracking wee RDA but not any better than what I already have so it's back up for sale all ready
I also got a half litre of VG nicotine from a group buy, good wee day for deliveries
Edited by stevoknevo on Friday 26th January 00:44
Edited by stevoknevo on Friday 26th January 02:00
Gassing Station | The Lounge | Top of Page | What's New | My Stuff