More frivolous purchases, stuff you don't need..
Discussion
Sway said:
young_bairn said:
Well thanks to this thread and after almost a year since ordering, the Aquaforno II turned up. Of course it was missing a part (heat shield for tap).
Anybody else had theirs yet?
Mine arrives today... Anybody else had theirs yet?
Edited by young_bairn on Thursday 21st February 02:19
Pizza party in our new house on Saturday, so can live with a delayed tap heat shield (assuming it's consistent) - but hope nothing else is missing.
Whilst it's taken seemingly forever, I'm really looking forward to having a play.
Half hour of smoothing waters, she's given me a hand building it - really quite a nice bit of kit, although it won't replace either of my smokers which is a little disappointing (even though they explained it wasn't designed for hot or cold smoking I was hopeful).
However, I too am missing the heat shield (although have another odd bracket I can't identify, looks like it might be the rotisserie motor holder?). I'm also missing the additions I bought - I went for the full stainless kit, but only the basic has turned up.
So, missing parts list:
Heat shield
Gas burner (which I was aware had been further delayed)
Pizza peel
Mezzaluna
Rotisserie
Paella Pan
Email being sent...
Anyone got any ideas for a makeshift pizza peel? Got familial folks coming round Saturday for a housewarming pizza party...
Dunno if I'm a fan of this crowdfunding lark.
Joshsl said:
I brought this yesterday for three very good and very important reasons
1) I have a stupid fetish for snap on tools
2) because I wanted it
3) it was quite cheap
I have no need for it and no idea what I’m going to do with it once I have finished putting it up my nose( where else would you put a second hand borescope that will probably be coverd In old engine oil)
Brought where?1) I have a stupid fetish for snap on tools
2) because I wanted it
3) it was quite cheap
I have no need for it and no idea what I’m going to do with it once I have finished putting it up my nose( where else would you put a second hand borescope that will probably be coverd In old engine oil)
Sway said:
Mine arrives today...
Pizza party in our new house on Saturday, so can live with a delayed tap heat shield (assuming it's consistent) - but hope nothing else is missing.
Whilst it's taken seemingly forever, I'm really looking forward to having a play.
Yes I am itching to fire it up. There is going to be a lot of trial and error I feel.Pizza party in our new house on Saturday, so can live with a delayed tap heat shield (assuming it's consistent) - but hope nothing else is missing.
Whilst it's taken seemingly forever, I'm really looking forward to having a play.
I thought this as good a place to ask as any, seeing as it's an utterly pointless "need"
Does anyone have experience of buying a half decent monogrammed shirt?
I'd like the monogram on the lower front quarter of the shirt rather than the cuff or collar.
Ideally id like a reasonabily high quality material.
Does anyone have experience of buying a half decent monogrammed shirt?
I'd like the monogram on the lower front quarter of the shirt rather than the cuff or collar.
Ideally id like a reasonabily high quality material.
- awaits ridicule*
Swampy1982 said:
I thought this as good a place to ask as any, seeing as it's an utterly pointless "need"
Does anyone have experience of buying a half decent monogrammed shirt?
I'd like the monogram on the lower front quarter of the shirt rather than the cuff or collar.
Ideally id like a reasonabily high quality material.
I'm not that good at ridicule; would some pity do?Does anyone have experience of buying a half decent monogrammed shirt?
I'd like the monogram on the lower front quarter of the shirt rather than the cuff or collar.
Ideally id like a reasonabily high quality material.
- awaits ridicule*
V8mate said:
Swampy1982 said:
I thought this as good a place to ask as any, seeing as it's an utterly pointless "need"
Does anyone have experience of buying a half decent monogrammed shirt?
I'd like the monogram on the lower front quarter of the shirt rather than the cuff or collar.
Ideally id like a reasonabily high quality material.
I'm not that good at ridicule; would some pity do?Does anyone have experience of buying a half decent monogrammed shirt?
I'd like the monogram on the lower front quarter of the shirt rather than the cuff or collar.
Ideally id like a reasonabily high quality material.
- awaits ridicule*
young_bairn said:
Sway said:
Mine arrives today...
Pizza party in our new house on Saturday, so can live with a delayed tap heat shield (assuming it's consistent) - but hope nothing else is missing.
Whilst it's taken seemingly forever, I'm really looking forward to having a play.
Yes I am itching to fire it up. There is going to be a lot of trial and error I feel.Pizza party in our new house on Saturday, so can live with a delayed tap heat shield (assuming it's consistent) - but hope nothing else is missing.
Whilst it's taken seemingly forever, I'm really looking forward to having a play.
Swampy1982 said:
V8mate said:
Swampy1982 said:
I thought this as good a place to ask as any, seeing as it's an utterly pointless "need"
Does anyone have experience of buying a half decent monogrammed shirt?
I'd like the monogram on the lower front quarter of the shirt rather than the cuff or collar.
Ideally id like a reasonabily high quality material.
I'm not that good at ridicule; would some pity do?Does anyone have experience of buying a half decent monogrammed shirt?
I'd like the monogram on the lower front quarter of the shirt rather than the cuff or collar.
Ideally id like a reasonabily high quality material.
- awaits ridicule*
Sway said:
young_bairn said:
Sway said:
Mine arrives today...
Pizza party in our new house on Saturday, so can live with a delayed tap heat shield (assuming it's consistent) - but hope nothing else is missing.
Whilst it's taken seemingly forever, I'm really looking forward to having a play.
Yes I am itching to fire it up. There is going to be a lot of trial and error I feel.Pizza party in our new house on Saturday, so can live with a delayed tap heat shield (assuming it's consistent) - but hope nothing else is missing.
Whilst it's taken seemingly forever, I'm really looking forward to having a play.
Edited by young_bairn on Thursday 21st February 21:18
Mafffew said:
Mr Obertshaw said:
I want one for myself, I'm sure a 6ft man can fit? NDA said:
Mr Obertshaw said:
Just picked this up for £10 facebook. Given the price I think it was more nessecary than frivolous. Unsure why, but my wife seems pissed off that it's in the hallway! My 2 year old is going to be over the moon when he wakes up the morning though. I Just need to find a bigger motor!
He's going to love that!I bought my son a Jaguar XKR pedal car when I also owned an XKR - he was welded to that car for a long while.
There were many dents at the bottom of dishwashers, fridges and tumble driers. Be warned!
Mr Obertshaw said:
NDA said:
Mr Obertshaw said:
Just picked this up for £10 facebook. Given the price I think it was more nessecary than frivolous. Unsure why, but my wife seems pissed off that it's in the hallway! My 2 year old is going to be over the moon when he wakes up the morning though. I Just need to find a bigger motor!
He's going to love that!I bought my son a Jaguar XKR pedal car when I also owned an XKR - he was welded to that car for a long while.
There were many dents at the bottom of dishwashers, fridges and tumble driers. Be warned!
VEA said:
Joshsl said:
I brought this yesterday for three very good and very important reasons
1) I have a stupid fetish for snap on tools
2) because I wanted it
3) it was quite cheap
I have no need for it and no idea what I’m going to do with it once I have finished putting it up my nose( where else would you put a second hand borescope that will probably be coverd In old engine oil)
Brought where?1) I have a stupid fetish for snap on tools
2) because I wanted it
3) it was quite cheap
I have no need for it and no idea what I’m going to do with it once I have finished putting it up my nose( where else would you put a second hand borescope that will probably be coverd In old engine oil)
For some reason this always annoys me more than it should really...
V8mate said:
Lazermilk said:
For some reason this always annoys me more than it should really...
Clockwork Cupcake said:
Lazermilk said:
For some reason this always annoys me more than it should really...
If only there were a dedicated thread where one could express such sentiments. Mr Obertshaw said:
Isadly it won't fit though a door frame. It's nearly 6 ft long and 3ft wide... The tires are wider than the ones on my wife's car! It's now in the garage, 2 new batteries and a fuse and it got a run in the garden, it has the turning circle of a super tanker.
Good opportunity to teach the little fella, how to drift.Gassing Station | The Lounge | Top of Page | What's New | My Stuff