What's your favourite thread size?
Discussion
Tango13 said:
I used to do a lot of 10-32 UNF years ago and M46 X 2mm was another favourite.
Never been a fan of the BA threads or BSPT either.
I can see where people are coming from with their love of the M6 X 1mm though and I do enjoy watching our RoboDrill tapping an M6 at 8,000rpm
I just sold a very nice T21 Robodrill today with a 24000rpm spindle. Back on threads the one that pisses me off is 1/2 BSW and 1/2 UNC being 1TPI different to each other, why when every other size has the same TPI????Never been a fan of the BA threads or BSPT either.
I can see where people are coming from with their love of the M6 X 1mm though and I do enjoy watching our RoboDrill tapping an M6 at 8,000rpm
oddball1313 said:
Tango13 said:
I used to do a lot of 10-32 UNF years ago and M46 X 2mm was another favourite.
Never been a fan of the BA threads or BSPT either.
I can see where people are coming from with their love of the M6 X 1mm though and I do enjoy watching our RoboDrill tapping an M6 at 8,000rpm
I just sold a very nice T21 Robodrill today with a 24000rpm spindle. Back on threads the one that pisses me off is 1/2 BSW and 1/2 UNC being 1TPI different to each other, why when every other size has the same TPI????Never been a fan of the BA threads or BSPT either.
I can see where people are coming from with their love of the M6 X 1mm though and I do enjoy watching our RoboDrill tapping an M6 at 8,000rpm
The next big question is how do people like to make their threads? Rolling, tapping, turning or my personal favourite helical interpolation
Tango13 said:
Our RoboDrill is the high power 24,000rpm version but it only taps at 8,000rpm, still a bloody amazing machine considering it's only a BT30 spindle.
The next big question is how do people like to make their threads? Rolling, tapping, turning or my personal favourite helical interpolation
Don't forget thread milling.The next big question is how do people like to make their threads? Rolling, tapping, turning or my personal favourite helical interpolation
Tango13 said:
oddball1313 said:
Tango13 said:
I used to do a lot of 10-32 UNF years ago and M46 X 2mm was another favourite.
Never been a fan of the BA threads or BSPT either.
I can see where people are coming from with their love of the M6 X 1mm though and I do enjoy watching our RoboDrill tapping an M6 at 8,000rpm
I just sold a very nice T21 Robodrill today with a 24000rpm spindle. Back on threads the one that pisses me off is 1/2 BSW and 1/2 UNC being 1TPI different to each other, why when every other size has the same TPI????Never been a fan of the BA threads or BSPT either.
I can see where people are coming from with their love of the M6 X 1mm though and I do enjoy watching our RoboDrill tapping an M6 at 8,000rpm
The next big question is how do people like to make their threads? Rolling, tapping, turning or my personal favourite helical interpolation
Ever tried a Komet JEL which drills the pilot hole and then threads mills it in one op?
https://youtu.be/wilMS20S_io
Huntsman said:
M7. Love the quirkyness,
Unless of course we're not just talking metric, in which case, i just love BA!
BSP - nasty mess!
I always thought I was alone and a threads nerd.
Technically BA threads are metric, which all thread nerds kno........Unless of course we're not just talking metric, in which case, i just love BA!
BSP - nasty mess!
I always thought I was alone and a threads nerd.
Anyway, my favourite is 1/4 whitworth, holding together Austin Sevens all round the world.
Depends where. Engine bay, or somewhere dryish, I like an M8 as a nice balance between size and strength to moderately hold something together. Also not too difficult to drill out in the worst case
If it's underneath and exposed, then M12 for strength (i.e. you shouldn't snap it and it has a big head that should be less easy to round).
M7, grr. Never have any spares.
If it's underneath and exposed, then M12 for strength (i.e. you shouldn't snap it and it has a big head that should be less easy to round).
M7, grr. Never have any spares.
I saw these the other night on some documentry, wooden nuts and bolts. They were used to hold this together Atlas 1 TRESTLE metal being no good as they wood skew the test results. Not sure what pitch they are, maybe there is a web page with a load of thread pitch geeks on
fourfoldroot said:
Technically BA threads are metric, which all thread nerds kno........
Not so.Iso metric standard has a 60 deg thread form.
BA thread form is 47.5 degrees.
BA does not have the truncated top and bottom of the form like metric.
Its true that the BA starting point is a nominal 6mm diameter and 1mm pitch, but the series is most certainly not metric.
dudleybloke said:
For rolled threads a Waterbury Farrel plate die thread roller is satisfying to use but the simpleness of a Fette roller is hard to beat.
For chasers I'm a Coventry man, Landis come a close second then Namco.
Most satisfying is single point turning a large thread.
Dirty boy.For chasers I'm a Coventry man, Landis come a close second then Namco.
Most satisfying is single point turning a large thread.
Gassing Station | The Lounge | Top of Page | What's New | My Stuff